4G0955276 Front Right Headlight Washer Nozzle Cover for AUDI A6 2012

4G0955276 Front Right Headlight Washer Nozzle Cover Product Overview

The component shown under 4G0955276 is a front right headlight washer nozzle cover intended for AUDI A6 2012. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.

Fitment and Washer-System Application for A6

Compatibility for 4G0955276 should be confirmed against AUDI A6 2012 and the right installation side. The review should check the washer jet position relative to the headlamp lens, verify that the OE reference is not for the opposite side, and confirm that the vehicle is equipped with a factory headlight washer system. Use the removed part and product photographs to compare the nozzle travel direction with the vehicle-side installation, review facelift and pre-facelift washer layouts, and compare every tab, clip seat and locating shoulder; finally, compare the hose connection or cover hinge with the original part and confirm the front bumper option before ordering.

Headlight Washer Nozzle Cover Function and Design Notes

The visible and hidden interfaces of AD02010-054 should be checked separately. For this headlight washer nozzle cover, check the cap hinge or retaining point, review the bracket stiffness and screw seats, and compare the distance between mounting points. A direct comparison with the removed part should additionally inspect the base bracket around every locating slot, check the complete supplied scope against the photographs, and review the engagement of the cover with the nozzle stem. Before the item is accepted, compare the depth of the actuator body and inspect the telescopic body for smooth movement.

OE Identification and Side Confirmation

4G0955276 is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-054 is the internal item code. Match both references to the vehicle record, then confirm that the vehicle is equipped with a factory headlight washer system. Do not substitute the mirrored side merely because the visible cover shape appears similar.

Installation and System Testing Guidance

Workshop preparation for AD02010-054 begins before the bumper area is disturbed: support the bumper cover while accessing the hidden actuator and follow the vehicle workshop procedure for bumper removal. During trial fitting, inspect nearby wiring and sensors before refitting trim, compare the installed height with the opposite side, and verify that the cover closes without rubbing the bumper. Before returning the vehicle to service, photograph the original routing before disassembly, retain the original fasteners unless replacements are specified, and work with the washer system depressurized.

Receiving Inspection

When AD02010-054 arrives, receiving staff should protect the visible face again after inspection is complete, record carton damage before the item is moved to workshop stock, and compare the visible surface texture with the ordered specification. Before workshop release, compare the supplied side with the vehicle repair order, confirm that loose accessories are identified on the packing list, verify that protective plugs remain in open fluid connections, and inspect the fluid passage only with clean, non-damaging tools. Complete the inspection by ensuring that staff inspect the rear locator shape without forcing any movable section, check the cap hinge or retaining point for free movement, and verify the nozzle head returns smoothly without applying excess force.

Product Technical Specifications

Product type: Front Right Headlight Washer Nozzle Cover

Primary OE reference: 4G0955276

Cross-reference numbers: 4G0 955 276 4G0955276

Internal item code: AD02010-054

Vehicle brand: AUDI

Vehicle model: A6

Model year: 2012

Installation position: Front bumper / headlamp washer area

Side / orientation: Right

Applicable vehicle: AUDI A6 2012

Wholesale Supply and Protective Packing

For a quotation or repeat order of 4G0955276, please state the requested delivery schedule, request replacement-part documentation when required, and include the full OE reference on the purchase order. Packing instructions should confirm sample requirements before a bulk order, check carton labels at receiving, and separate fragile actuator bodies from heavier metal parts. Before dispatch, confirm the acceptable delivery window and identify the required installation side.

Frequently Asked Questions

How should 4G0955276 be checked before installation?

Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For item AD02010-054, the approval should verify the required left or right installation side. The same item record should also verify nearby parking-sensor or trim interfaces.

Are clips, hoses or fasteners supplied with 4G0955276?

The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. On the listed AUDI A6 2012, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally include the full OE reference on the purchase order.

Which side uses 4G0955276?

This front right headlight washer nozzle cover is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. For the right-side order line, check the cap hinge or retaining point. The order review should further check the joint between the visible cap and hidden support.

Why must left and right versions of 4G0955276 be distinguished?

Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. The product-specific check for 4G0955276 should check the fluid inlet for storage contamination. Receiving staff should also compare the distance between mounting points.

Is a sample order available for 4G0955276?

Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. Before this headlight washer nozzle cover is accepted, confirm the preferred incoterm. Before approval, the buyer or technician should verify the packed quantity by OE reference.

Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.

Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.

Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.

Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.

Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.