AutoParts
46723715 Blower Motor for FIAT
Blower Motor — 46723715. FIAT. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.
- OE reference
- 46723715
- Supplier SKU
- 6219-024
- Vehicle application
- FIAT
- Part type
- Blower Motor
Key references
- OE reference
- 46723715
- Supplier SKU
- 6219-024
- Vehicle application
- FIAT
- Part type
- Blower Motor
Product specifications
| OE reference | 46723715 |
|---|---|
| Supplier SKU | 6219-024 |
| Vehicle application | FIAT |
| Vehicle make | FIAT |
| Vehicle model | Confirm by OE reference |
| Production years | Confirm by OE reference |
| Part type | Blower Motor |
| Cross-reference numbers | 46723714 / 46722956 / 141730600 / 71735484 / 069412504010 / 698534 |
Product details
46723715 Automotive Blower Motor Overview
AutoParts catalogues 46723715 as an HVAC 46723715 airflow component for workshops, distributors and export buyers.
For catalogue item 6219-024, When the climate-control circuit commands 46723715 airflow, the electric motor rotates the 46723715 fan wheel inside the HVAC housing. Use 6219-024 when comparing this 46723715 airflow configuration.
OE Reference and Application
The primary catalogue number is 46723715 . The recorded application is FIAT. For 6219-024, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed FIAT unit. Record 6219-024 with the approved OE reference.
HVAC Interface and 46723715 installation
During work on 6219-024, If 46723715 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 46723715 motor is the only cause. Recheck 6219-024 before the lower trim is closed.
For item 6219-024, confirm that the 46723715 centrifugal wheel clears its housing and that the 6219-024 connector lock engages without force. After seating 6219-024, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6219-024.
Automotive HVAC Blower Motor Specifications
Product type: Automotive HVAC Blower Motor
Primary OE reference: 46723715
Cross-reference numbers: 46723714 / 46722956 / 141730600 / 71735484 / 069412504010 / 698534
Vehicle brand: FIAT
Vehicle model: Confirm by OE reference
Model year: Confirm by OE reference
46723715 installation area: Cabin HVAC / heater blower housing
Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel
Fitment method: OE-number and physical-geometry comparison
Quality and Trade Supply
For product 6219-024, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6219-024 record remains the picking reference.
For trade item 6219-024, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6219-024 on the packing instruction.
Frequently Asked Questions
How should item 6219-024 and blower number 46723715 be verified?
Match 6219-024 to the complete 46723715 marking, then compare the 6219-024 plug, terminal count, mounting flange and wheel dimensions with the removed FIAT unit.
Can 6219-024 have more than one vehicle-side blower configuration?
Yes. FIAT production changes can affect 6219-024; confirm steering position, climate-control specification and the original 6219-024 geometry before approval.
What circuit checks are useful when 6219-024 does not operate?
For 6219-024, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6219-024 motor again.
Which details should accompany a wholesale request for 6219-024?
Provide item 6219-024, OE 46723715, the stated application, quantity and destination; add 6219-024 carton or private-label requirements separately.
How can noise be avoided after fitting 6219-024?
Clear debris from the air inlet, check that the 6219-024 wheel turns freely, seat the 6219-024 flange evenly and keep wiring away from the impeller.
Request a quote for 6219-024: Send 46723715, the 6219-024 application and required quantity for a fitment and supply review.
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
Product classification
Vehicle systems
Cooling System
Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Part categories
Blower Motor
Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Frequently Asked Questions
What should I include in a quotation request?
Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.
How can I confirm the correct part?
Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.
Can I specify packing requirements?
Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.