AutoParts
46722992 Blower Motor for FIAT Grande Punto
Blower Motor — 46722992. FIAT Grande Punto. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.
- OE reference
- 46722992
- Supplier SKU
- 6219-015
- Vehicle application
- FIAT Grande Punto
- Part type
- Blower Motor
Key references
- OE reference
- 46722992
- Supplier SKU
- 6219-015
- Vehicle application
- FIAT Grande Punto
- Part type
- Blower Motor
Product specifications
| OE reference | 46722992 |
|---|---|
| Supplier SKU | 6219-015 |
| Vehicle application | FIAT Grande Punto |
| Vehicle make | FIAT |
| Vehicle model | Grande Punto |
| Production years | Confirm by OE reference |
| Part type | Blower Motor |
| Cross-reference numbers | 46722759 |
Product details
46722992 Automotive Blower Motor Overview
The 46722992 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6219-015, When the climate-control circuit commands 46722992 airflow, the electric motor rotates the 46722992 fan wheel inside the HVAC housing. Use 6219-015 when comparing this 46722992 airflow configuration.
OE Reference and Application
The primary catalogue number is 46722992 . The recorded application is FIAT Grande Punto. For 6219-015, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6219-015 with the approved OE reference.
HVAC Interface and 46722992 installation
During work on 6219-015, If 46722992 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 46722992 motor is the only cause. Recheck 6219-015 before the lower trim is closed.
For item 6219-015, confirm that the 46722992 centrifugal wheel clears its housing and that the 6219-015 connector lock engages without force. After seating 6219-015, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6219-015.
Automotive HVAC Blower Motor Specifications
Product type: Automotive HVAC Blower Motor
Primary OE reference: 46722992
Cross-reference numbers: 46722759
Vehicle brand: FIAT
Vehicle model: Grande Punto
Model year: Confirm by OE reference
46722992 installation area: Cabin HVAC / heater blower housing
Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel
Fitment method: OE-number and physical-geometry comparison
Quality and Trade Supply
For product 6219-015, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6219-015 record remains the picking reference.
For trade item 6219-015, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6219-015 on the packing instruction.
Frequently Asked Questions
How should item 6219-015 and blower number 46722992 be verified?
Match 6219-015 to the complete 46722992 marking, then compare the 6219-015 plug, terminal count, mounting flange and wheel dimensions with the removed FIAT unit.
Can 6219-015 have more than one vehicle-side blower configuration?
Yes. FIAT production changes can affect 6219-015; confirm steering position, climate-control specification and the original 6219-015 geometry before approval.
What circuit checks are useful when 6219-015 does not operate?
For 6219-015, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6219-015 motor again.
Which details should accompany a wholesale request for 6219-015?
Provide item 6219-015, OE 46722992, the stated application, quantity and destination; add 6219-015 carton or private-label requirements separately.
How can noise be avoided after fitting 6219-015?
Clear debris from the air inlet, check that the 6219-015 wheel turns freely, seat the 6219-015 flange evenly and keep wiring away from the impeller.
Request a quote for 6219-015: Send 46722992, the 6219-015 application and required quantity for a fitment and supply review.
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
Product classification
Vehicle systems
Cooling System
Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Part categories
Blower Motor
Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Frequently Asked Questions
What should I include in a quotation request?
Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.
How can I confirm the correct part?
Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.
Can I specify packing requirements?
Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.