AutoParts
42424010 Blower Motor for CHEVROLET Captiva
Blower Motor — 42424010. CHEVROLET Captiva. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.
- OE reference
- 42424010
- Supplier SKU
- 6209-003
- Vehicle application
- CHEVROLET Captiva
- Part type
- Blower Motor
Key references
- OE reference
- 42424010
- Supplier SKU
- 6209-003
- Vehicle application
- CHEVROLET Captiva
- Part type
- Blower Motor
Product specifications
| OE reference | 42424010 |
|---|---|
| Supplier SKU | 6209-003 |
| Vehicle application | CHEVROLET Captiva |
| Vehicle make | CHEVROLET |
| Vehicle model | Captiva |
| Production years | Confirm by OE reference |
| Part type | Blower Motor |
| Cross-reference numbers | 96440877 / 4803882 / 96327369 / 96629612 / 96675858 / 4691105 / 4803883 / F38101020 |
Product details
42424010 Automotive Blower Motor Overview
The 42424010 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6209-003, When the climate-control circuit commands 42424010 airflow, the electric motor rotates the 42424010 fan wheel inside the HVAC housing. Use 6209-003 when comparing this 42424010 airflow configuration.
OE Reference and Application
The primary catalogue number is 42424010 . The recorded application is CHEVROLET Captiva. For 6209-003, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6209-003 with the approved OE reference.
HVAC Interface and 42424010 installation
During work on 6209-003, If 42424010 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 42424010 motor is the only cause. Recheck 6209-003 before the lower trim is closed.
For item 6209-003, confirm that the 42424010 centrifugal wheel clears its housing and that the 6209-003 connector lock engages without force. After seating 6209-003, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6209-003.
Automotive HVAC Blower Motor Specifications
Product type: Automotive HVAC Blower Motor
Primary OE reference: 42424010
Cross-reference numbers: 96440877 / 4803882 / 96327369 / 96629612 / 96675858 / 4691105 / 4803883 / F38101020
Vehicle brand: CHEVROLET
Vehicle model: Captiva
Model year: Confirm by OE reference
42424010 installation area: Cabin HVAC / heater blower housing
Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel
Fitment method: OE-number and physical-geometry comparison
Quality and Trade Supply
For product 6209-003, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6209-003 record remains the picking reference.
For trade item 6209-003, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6209-003 on the packing instruction.
Frequently Asked Questions
How should item 6209-003 and blower number 42424010 be verified?
Match 6209-003 to the complete 42424010 marking, then compare the 6209-003 plug, terminal count, mounting flange and wheel dimensions with the removed CHEVROLET unit.
Can 6209-003 have more than one vehicle-side blower configuration?
Yes. CHEVROLET production changes can affect 6209-003; confirm steering position, climate-control specification and the original 6209-003 geometry before approval.
What circuit checks are useful when 6209-003 does not operate?
For 6209-003, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6209-003 motor again.
Which details should accompany a wholesale request for 6209-003?
Provide item 6209-003, OE 42424010, the stated application, quantity and destination; add 6209-003 carton or private-label requirements separately.
How can noise be avoided after fitting 6209-003?
Clear debris from the air inlet, check that the 6209-003 wheel turns freely, seat the 6209-003 flange evenly and keep wiring away from the impeller.
Request a quote for 6209-003: Send 42424010, the 6209-003 application and required quantity for a fitment and supply review.
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
Product classification
Vehicle systems
Cooling System
Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Part categories
Blower Motor
Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Frequently Asked Questions
What should I include in a quotation request?
Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.
How can I confirm the correct part?
Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.
Can I specify packing requirements?
Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.