3R101C3827 Blower Motor for NISSAN

3R101C3827 Automotive Blower Motor Overview

This listing links 3R101C3827 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6205-070, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6205-070 when comparing this 3R101C3827 airflow configuration.

OE Reference and Application

The primary catalogue number is 3R101C3827 . The recorded application is NISSAN. For 6205-070, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6205-070 with the approved OE reference.

HVAC Interface and 3R101C3827 installation

During work on 6205-070, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 3R101C3827 installation. Recheck 6205-070 before the lower trim is closed.

For item 6205-070, confirm that the 3R101C3827 centrifugal wheel clears its housing and that the 6205-070 connector lock engages without force. After seating 6205-070, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-070.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 3R101C3827

Cross-reference numbers: 272110Z000

Vehicle brand: NISSAN

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

3R101C3827 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-070, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-070 record remains the picking reference.

For trade item 6205-070, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6205-070 on the packing instruction.

Frequently Asked Questions

How should item 6205-070 and blower number 3R101C3827 be verified?

Match 6205-070 to the complete 3R101C3827 marking, then compare the 6205-070 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-070 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-070; confirm steering position, climate-control specification and the original 6205-070 geometry before approval.

What circuit checks are useful when 6205-070 does not operate?

For 6205-070, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-070 motor again.

Which details should accompany a wholesale request for 6205-070?

Provide item 6205-070, OE 3R101C3827, the stated application, quantity and destination; add 6205-070 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-070?

Clear debris from the air inlet, check that the 6205-070 wheel turns freely, seat the 6205-070 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-070: Send 3R101C3827, the 6205-070 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country