3M5H-18456FC Blower Motor for FORD C-Max

3M5H-18456FC Automotive Blower Motor Overview

This product entry documents the 3M5H-18456FC blower unit with practical identification and 3M5H-18456FC installation checkpoints.

For catalogue item 6203-045, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 3M5H-18456FC blower important at idle and in traffic. Use 6203-045 when comparing this 3M5H-18456FC airflow configuration.

OE Reference and Application

The primary catalogue number is 3M5H-18456FC . The recorded application is FORD C-Max. For 6203-045, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6203-045 with the approved OE reference.

HVAC Interface and 3M5H-18456FC installation

During work on 6203-045, After 3M5H-18456FC installation, operate low through high speed and confirm 3M5H-18456FC airflow reaches the selected vents without abnormal vibration. Recheck 6203-045 before the lower trim is closed.

For item 6203-045, confirm that the 3M5H-18456FC centrifugal wheel clears its housing and that the 6203-045 connector lock engages without force. After seating 6203-045, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-045.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 3M5H-18456FC

Cross-reference numbers: 3M5H-18456BD / 125306 / 1326647 / 1379569 / 8EW351150-661 / 6G9T18456BA / 7G9T18456DA / 3M5H18456BB / 3M5H18456BC / AV6N18456BA / 1326643 / 1362641 / 1548220 / 1696007 / 700274

Vehicle brand: FORD

Vehicle model: C-Max

Model year: Confirm by OE reference

3M5H-18456FC installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6203-045, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6203-045 record remains the picking reference.

For trade item 6203-045, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6203-045 on the packing instruction.

Frequently Asked Questions

How should item 6203-045 and blower number 3M5H-18456FC be verified?

Match 6203-045 to the complete 3M5H-18456FC marking, then compare the 6203-045 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6203-045 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6203-045; confirm steering position, climate-control specification and the original 6203-045 geometry before approval.

What circuit checks are useful when 6203-045 does not operate?

For 6203-045, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-045 motor again.

Which details should accompany a wholesale request for 6203-045?

Provide item 6203-045, OE 3M5H-18456FC, the stated application, quantity and destination; add 6203-045 carton or private-label requirements separately.

How can noise be avoided after fitting 6203-045?

Clear debris from the air inlet, check that the 6203-045 wheel turns freely, seat the 6203-045 flange evenly and keep wiring away from the impeller.

Request a quote for 6203-045: Send 3M5H-18456FC, the 6203-045 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.

Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country