35498 Blower Motor for FORD Bronco

35498 Automotive Blower Motor Overview

AutoParts catalogues 35498 as an HVAC 35498 airflow component for workshops, distributors and export buyers.

For catalogue item 6203-129, When the climate-control circuit commands 35498 airflow, the electric motor rotates the 35498 fan wheel inside the HVAC housing. Use 6203-129 when comparing this 35498 airflow configuration.

OE Reference and Application

The primary catalogue number is 35498 . The recorded application is FORD Bronco. For 6203-129, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed FORD unit. Record 6203-129 with the approved OE reference.

HVAC Interface and 35498 installation

During work on 6203-129, If 35498 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 35498 motor is the only cause. Recheck 6203-129 before the lower trim is closed.

For item 6203-129, confirm that the 35498 centrifugal wheel clears its housing and that the 6203-129 connector lock engages without force. After seating 6203-129, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-129.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 35498

Cross-reference numbers: PM240

Vehicle brand: FORD

Vehicle model: Bronco

Model year: Confirm by OE reference

35498 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6203-129, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6203-129 record remains the picking reference.

For trade item 6203-129, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6203-129 on the packing instruction.

Frequently Asked Questions

How should item 6203-129 and blower number 35498 be verified?

Match 6203-129 to the complete 35498 marking, then compare the 6203-129 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6203-129 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6203-129; confirm steering position, climate-control specification and the original 6203-129 geometry before approval.

What circuit checks are useful when 6203-129 does not operate?

For 6203-129, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-129 motor again.

Which details should accompany a wholesale request for 6203-129?

Provide item 6203-129, OE 35498, the stated application, quantity and destination; add 6203-129 carton or private-label requirements separately.

How can noise be avoided after fitting 6203-129?

Clear debris from the air inlet, check that the 6203-129 wheel turns freely, seat the 6203-129 flange evenly and keep wiring away from the impeller.

Request a quote for 6203-129: Send 35498, the 6203-129 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country