34550-TFC-H01 Rear Bumper Light for HONDA CR-V 2015 Left

34550-TFC-H01 Rear Bumper Light Overview

This product is listed for HONDA CR-V 2015 at the left rear-bumper position. The part occupies a vehicle-specific bumper opening and may function as a reflector, rear fog lamp or auxiliary marker.

The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.

On the 2015 CR-V bumper layout, compare the bumper corner radius with the product face from more than one viewing angle because facelift bumpers can retain the same vehicle name with different apertures.

Bumper Opening and Vehicle Match

Check the bumper recess, outer contour and clip orientation; similar reflectors can use different hidden mounts.

The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.

At the workshop selection stage for CR-V, align each locating tab with the matching slot before applying hand pressure so left- and right-hand stock cannot be mixed during consolidation.

At the left rear-bumper position, check whether the original component uses a separate retainer or an integral locking tab so the approved product can be picked consistently in a mixed wholesale order.

Lens Construction and Powered Variants

If the original unit is powered, compare the socket, terminal count, cable exit and locking tab before installation.

Do not polish or modify the lens before fitment confirmation; altered parts are harder to compare accurately.

When reviewing the 2015 vehicle, verify the fastener direction and the shape of the concealed support frame so hidden brackets are not loaded or bent during installation.

For the HONDA CR-V application, protect the visible surface until the full perimeter gap has been accepted to preserve access for a final electrical test where a lamp circuit is present.

Mounting and Final Verification

After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.

Check the opposite side as a reference for height, angle and edge gap before completing the repair.

For this CR-V body configuration, review the reflector texture and lens colour in neutral workshop light to reduce clip damage during a no-force trial installation.

Before approving the CR-V part for packing, record the approved side and vehicle application for repeat-order identification to prevent a visually similar version from sitting proud of the bumper.

Automotive Lighting Product Specifications

Product type: Rear Bumper Light

Primary OE reference: 34550-TFC-H01

Cross-reference numbers: 34550-TFC-H01

Internal item code: HD04004-075

Vehicle brand: HONDA

Vehicle model: CR-V

Model year: 2015

Installation position: Rear bumper / reflector opening

Side / orientation: Left

Configuration: Match the photographed reflector or powered-lamp version

Wholesale Supply and Protective Packing

Confirm the required quantity and packaging method; exposed lens faces and projecting tabs need separate protection.

Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.

Before fitting the left unit, confirm that the cable exit, where fitted, clears the bumper reinforcement before the packaging and carton marking are finalized.

While the HONDA bumper opening is accessible, confirm that any connector seal remains square when the housing is fully seated before inner liners make the rear attachment points difficult to inspect.

Frequently Asked Questions

What if the bumper opening differs?

Stop the installation and compare market version, trim level and hidden mounting geometry before modifying any part.

Should original clips be reused?

Reuse hardware only when it is undamaged and correct for the photographed housing; replace distorted retainers.

When should photographs be supplied?

Send front, rear and bumper-opening images when the original marking is unclear or several versions share the vehicle name.

How is a passive reflector checked?

Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.

Can the opposite side use the same part?

Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.

Request a Product-Specific Quote

Destination and carton-marking requirements can be included with the vehicle-specific enquiry.

Bumper interface: Match the lens perimeter and rear support geometry rather than relying on colour or overall appearance alone.

Product function: Rear-bumper lighting improves low-mounted vehicle visibility; reflector-only versions return light without an electrical connection.

Post-fit check: Once seated, inspect the perimeter gap and verify that the bumper surface remains relaxed rather than distorted.

Trade-order details: Trade enquiries should include the vehicle year, model, bumper position and destination market for accurate picking.

Packing reference: Projecting tabs should be supported with shaped material instead of carrying the weight of other products.