33901-TP6-306 Fog Light for HONDA Crosstour 2011 Right

33901-TP6-306 Fog Light Product Overview

For OE-led sourcing, this page connects the lamp assembly with the stated model, year and mounting side. 33901-TP6-306 is catalogued as a fog light for HONDA Crosstour 2011, installed at the right rear bumper position.

33901-TP6-306 — Product Function for the Listed Vehicle

A front fog lamp adds low-mounted illumination in poor visibility while keeping the beam close to the road surface. For 33901-TP6-306 on the listed Crosstour, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU HD04002-016.

For SKU HD04002-016, state the destination, quantity and preferred packaging. Quoting 33901-TP6-306 with the HONDA Crosstour 2011 and right position helps separate lighting-technology and model-year variants during packing.

HD04002-016 — Fitment Evidence to Compare

Start with the full reference 33901-TP6-306; then verify that the listed side matches the vehicle. Item HD04002-016 should not be approved if its housing, bracket layout, right orientation or market specification differs from the removed fog light.

33901-TP6-306 — Lighting Hardware Details

Use the 33901-TP6-306 page photographs to inspect lens clarity and reflector geometry. For electrical compatibility on SKU HD04002-016, review the vehicle circuit if the existing lamp has intermittent output and confirm the plug reaches its locked position without modification.

HD04002-016 — Installation Sequence

Before securing 33901-TP6-306, inspect damaged brackets before installing the replacement. After connecting SKU HD04002-016, test its stated lighting function and check alignment, clearance and harness routing around the rear bumper area.

Automotive Lighting Product Specifications

Product type: Fog Light

Primary OE reference: 33901-TP6-306

Cross-reference numbers: 33901-TP6-306

Internal item code: HD04002-016

Vehicle brand: HONDA

Vehicle model: Crosstour

Model year: 2011

Installation position: Rear bumper

Installation side: Right

Lighting version: Match the photographed configuration

Product function: Vehicle exterior lighting for the stated bumper position

Wholesale Supply and Protective Packing

For 33901-TP6-306, the lens face is isolated from carton pressure, while projecting brackets are supported against impact. For SKU HD04002-016, carton selection accounts for housing depth, mounting ears and any exposed aiming hardware.

Frequently Asked Questions

How should 33901-TP6-306 be installed?

For item HD04002-016, use a no-force trial fit, transfer only suitable original hardware, secure the housing evenly and test function before reinstalling liners or trim.

What should be checked on the connector for 33901-TP6-306?

Compare pin count, keying, latch position and cable direction; for LED versions, also verify that the required electronics match the Crosstour application.

How do I confirm 33901-TP6-306 for my vehicle?

Match 33901-TP6-306, the right position, vehicle year, housing depth, mounting ears and electrical connector with the original HONDA lamp.

Why compare the bumper opening for 33901-TP6-306?

SKU HD04002-016 may resemble another lamp while differing in bracket spacing, housing depth or bezel interface; those differences can prevent correct seating.

Can model year alone confirm 33901-TP6-306 fitment?

No. For SKU HD04002-016, vehicles built in the same year can use different lighting packages, so use 33901-TP6-306 and the removed lamp geometry as the primary evidence.

Request a Product-Specific Quote

Send the complete OE reference 33901-TP6-306, internal number HD04002-016, vehicle details, side, quantity and destination. AutoParts can review the photographed configuration before preparing a trade quotation.

Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.

Housing and lens check: Compare the lens outline, rear housing depth and adjustment points with the removed lamp.

Mounting comparison: Compare every locating tab, fixing hole and support bracket with the original lamp assembly.

Electrical connection: Verify the electrical socket and locking feature before connecting the vehicle wiring.

Installation guidance: Dry-fit the lamp first, align the bumper opening and tighten the fasteners evenly.

Quotation information: State the OE reference, model year, mounting side and order quantity when requesting a quote.