33900-TB0-H01 Fog Light for HONDA Accord 2008 Right

33900-TB0-H01 Fog Light Product Overview

For OE-led sourcing, this page connects the lamp assembly with the stated model, year and mounting side. 33900-TB0-H01 is catalogued as a fog light for HONDA Accord 2008, installed at the right front bumper position.

33900-TB0-H01 — Vehicle Lighting Role

Rear fog lamp versions provide a high-intensity warning signal and must be matched to the correct rear position. For 33900-TB0-H01 on the listed Accord, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU HD04002-004.

For SKU HD04002-004, separate standard, LED and multi-lens versions in the purchase list. Quoting 33900-TB0-H01 with the HONDA Accord 2008 and right position helps separate lighting-technology and model-year variants during packing.

HD04002-004 — Part Number and Geometry Review

Start with the full reference 33900-TB0-H01; then verify every mounting ear before approving quantity. Item HD04002-004 should not be approved if its housing, bracket layout, right orientation or market specification differs from the removed fog light.

33900-TB0-H01 — Optical and Connector Details

Use the 33900-TB0-H01 page photographs to check the aiming mechanism and ventilation features. For electrical compatibility on SKU HD04002-004, confirm that the connector seats fully without forcing the lock and confirm the plug reaches its locked position without modification.

HD04002-004 — Workshop Preparation

Before securing 33900-TB0-H01, avoid touching a replacement bulb glass with bare fingers. After connecting SKU HD04002-004, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.

Automotive Lighting Product Specifications

Product type: Fog Light

Primary OE reference: 33900-TB0-H01

Cross-reference numbers: 33900-TB0-H01

Internal item code: HD04002-004

Vehicle brand: HONDA

Vehicle model: Accord

Model year: 2008

Installation position: Front bumper

Installation side: Right

Lighting version: Match the photographed configuration

Product function: Vehicle exterior lighting for the stated bumper position

Wholesale Supply and Protective Packing

For 33900-TB0-H01, carton selection accounts for housing depth, mounting ears and any exposed aiming hardware. For SKU HD04002-004, carton selection accounts for housing depth, mounting ears and any exposed aiming hardware.

Frequently Asked Questions

Why compare the bumper opening for 33900-TB0-H01?

SKU HD04002-004 may resemble another lamp while differing in bracket spacing, housing depth or bezel interface; those differences can prevent correct seating.

Can model year alone confirm 33900-TB0-H01 fitment?

No. For SKU HD04002-004, vehicles built in the same year can use different lighting packages, so use 33900-TB0-H01 and the removed lamp geometry as the primary evidence.

Is 33900-TB0-H01 interchangeable between left and right sides?

No interchangeability should be assumed. The right housing, reflector orientation and brackets must correspond to the original bumper position.

How is the 33900-TB0-H01 optical surface protected for shipping?

Packing for SKU HD04002-004 should isolate the lens from pressure and support projecting tabs, connector areas and adjustment hardware inside the carton.

What information is useful for a wholesale quotation?

Provide 33900-TB0-H01, SKU HD04002-004, the vehicle application, mounting side, quantity, destination and photographs of the original lamp.

Request a Product-Specific Quote

Send the complete OE reference 33900-TB0-H01, internal number HD04002-004, vehicle details, side, quantity and destination. AutoParts can review the photographed configuration before preparing a trade quotation.

Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.

Housing and lens check: Check the visible lens profile, housing shape and rear clearance against the original unit.

Mounting comparison: Verify the bracket layout, locating points and fastener direction before installation.

Electrical connection: Check that the harness connector seats fully and uses the same terminal arrangement.

Installation guidance: Test the lighting function before completing bumper reassembly and final alignment.

Quotation information: Include the vehicle application, lamp side, OE number and quantity for accurate order matching.