AutoParts

2Q1.819.021.A Blower Motor for VOLKSWAGEN Polo

Blower Motor — 2Q1.819.021.A. VOLKSWAGEN Polo. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
2Q1.819.021.A
Supplier SKU
6220-082
Vehicle application
VOLKSWAGEN Polo
Part type
Blower Motor
Send an inquiry

Key references

OE reference
2Q1.819.021.A
Supplier SKU
6220-082
Vehicle application
VOLKSWAGEN Polo
Part type
Blower Motor

Product specifications

OE reference2Q1.819.021.A
Supplier SKU6220-082
Vehicle applicationVOLKSWAGEN Polo
Vehicle makeVOLKSWAGEN
Vehicle modelPolo
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbersT44206C / T27449B / RC530134

Product details

2Q1.819.021.A Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by 2Q1.819.021.A to support OE-number comparison before purchase.

For catalogue item 6220-082, Cabin 2Q1.819.021.A airflow depends on the 2Q1.819.021.A motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6220-082 when comparing this 2Q1.819.021.A airflow configuration.

OE Reference and Application

The primary catalogue number is 2Q1.819.021.A . The recorded application is VOLKSWAGEN Polo. For 6220-082, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6220-082 with the approved OE reference.

HVAC Interface and 2Q1.819.021.A installation

During work on 6220-082, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6220-082 before the lower trim is closed.

For item 6220-082, confirm that the 2Q1.819.021.A centrifugal wheel clears its housing and that the 6220-082 connector lock engages without force. After seating 6220-082, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6220-082.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 2Q1.819.021.A

Cross-reference numbers: T44206C / T27449B / RC530134

Vehicle brand: VOLKSWAGEN

Vehicle model: Polo

Model year: Confirm by OE reference

2Q1.819.021.A installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6220-082, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6220-082 record remains the picking reference.

For trade item 6220-082, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6220-082 on the packing instruction.

Frequently Asked Questions

How should item 6220-082 and blower number 2Q1.819.021.A be verified?

Match 6220-082 to the complete 2Q1.819.021.A marking, then compare the 6220-082 plug, terminal count, mounting flange and wheel dimensions with the removed VOLKSWAGEN unit.

Can 6220-082 have more than one vehicle-side blower configuration?

Yes. VOLKSWAGEN production changes can affect 6220-082; confirm steering position, climate-control specification and the original 6220-082 geometry before approval.

What circuit checks are useful when 6220-082 does not operate?

For 6220-082, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6220-082 motor again.

Which details should accompany a wholesale request for 6220-082?

Provide item 6220-082, OE 2Q1.819.021.A, the stated application, quantity and destination; add 6220-082 carton or private-label requirements separately.

How can noise be avoided after fitting 6220-082?

Clear debris from the air inlet, check that the 6220-082 wheel turns freely, seat the 6220-082 flange evenly and keep wiring away from the impeller.

Request a quote for 6220-082: Send 2Q1.819.021.A, the 6220-082 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.