2K00030352 Blower Motor for NISSAN

2K00030352 Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by 2K00030352 to support OE-number comparison before purchase.

For catalogue item 6205-094, Cabin 2K00030352 airflow depends on the 2K00030352 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6205-094 when comparing this 2K00030352 airflow configuration.

OE Reference and Application

The primary catalogue number is 2K00030352 . The recorded application is NISSAN. For 6205-094, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6205-094 with the approved OE reference.

HVAC Interface and 2K00030352 installation

During work on 6205-094, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6205-094 before the lower trim is closed.

For item 6205-094, confirm that the 2K00030352 centrifugal wheel clears its housing and that the 6205-094 connector lock engages without force. After seating 6205-094, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-094.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 2K00030352

Cross-reference numbers: 2K00030352

Vehicle brand: NISSAN

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

2K00030352 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-094, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-094 record remains the picking reference.

For trade item 6205-094, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6205-094 on the packing instruction.

Frequently Asked Questions

How should item 6205-094 and blower number 2K00030352 be verified?

Match 6205-094 to the complete 2K00030352 marking, then compare the 6205-094 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-094 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-094; confirm steering position, climate-control specification and the original 6205-094 geometry before approval.

What circuit checks are useful when 6205-094 does not operate?

For 6205-094, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-094 motor again.

Which details should accompany a wholesale request for 6205-094?

Provide item 6205-094, OE 2K00030352, the stated application, quantity and destination; add 6205-094 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-094?

Clear debris from the air inlet, check that the 6205-094 wheel turns freely, seat the 6205-094 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-094: Send 2K00030352, the 6205-094 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country