282500-1371 Blower Motor for NISSAN

282500-1371 Automotive Blower Motor Overview

This product entry documents the 282500-1371 blower unit with practical identification and 282500-1371 installation checkpoints.

For catalogue item 6205-073, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 282500-1371 blower important at idle and in traffic. Use 6205-073 when comparing this 282500-1371 airflow configuration.

OE Reference and Application

The primary catalogue number is 282500-1371 . The recorded application is NISSAN. For 6205-073, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6205-073 with the approved OE reference.

HVAC Interface and 282500-1371 installation

During work on 6205-073, After 282500-1371 installation, operate low through high speed and confirm 282500-1371 airflow reaches the selected vents without abnormal vibration. Recheck 6205-073 before the lower trim is closed.

For item 6205-073, confirm that the 282500-1371 centrifugal wheel clears its housing and that the 6205-073 connector lock engages without force. After seating 6205-073, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-073.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 282500-1371

Cross-reference numbers: S8710-41200 / S8710-41090 / 116340-6181

Vehicle brand: NISSAN

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

282500-1371 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-073, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-073 record remains the picking reference.

For trade item 6205-073, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6205-073 on the packing instruction.

Frequently Asked Questions

How should item 6205-073 and blower number 282500-1371 be verified?

Match 6205-073 to the complete 282500-1371 marking, then compare the 6205-073 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-073 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-073; confirm steering position, climate-control specification and the original 6205-073 geometry before approval.

What circuit checks are useful when 6205-073 does not operate?

For 6205-073, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-073 motor again.

Which details should accompany a wholesale request for 6205-073?

Provide item 6205-073, OE 282500-1371, the stated application, quantity and destination; add 6205-073 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-073?

Clear debris from the air inlet, check that the 6205-073 wheel turns freely, seat the 6205-073 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-073: Send 282500-1371, the 6205-073 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.

Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country