AutoParts

272V06LE0B Blower Motor for NISSAN Qashqai

Blower Motor — 272V06LE0B. NISSAN Qashqai. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
272V06LE0B
Supplier SKU
6205-086
Vehicle application
NISSAN Qashqai
Part type
Blower Motor
Send an inquiry

Key references

OE reference
272V06LE0B
Supplier SKU
6205-086
Vehicle application
NISSAN Qashqai
Part type
Blower Motor

Product specifications

OE reference272V06LE0B
Supplier SKU6205-086
Vehicle applicationNISSAN Qashqai
Vehicle makeNISSAN
Vehicle modelQashqai
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers189456 / 1285403 / BL0169 / 615.MS1422

Product details

272V06LE0B Automotive Blower Motor Overview

Buyers comparing an interior fan motor can use 272V06LE0B together with the 272V06LE0B product images and vehicle data on this page.

For catalogue item 6205-086, the 272V06LE0B blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-086 when comparing this 272V06LE0B airflow configuration.

OE Reference and Application

The primary catalogue number is 272V06LE0B . The recorded application is NISSAN Qashqai. For 6205-086, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6205-086 with the approved OE reference.

HVAC Interface and 272V06LE0B installation

During work on 6205-086, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-086 before the lower trim is closed.

For item 6205-086, confirm that the 272V06LE0B centrifugal wheel clears its housing and that the 6205-086 connector lock engages without force. After seating 6205-086, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-086.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 272V06LE0B

Cross-reference numbers: 189456 / 1285403 / BL0169 / 615.MS1422

Vehicle brand: NISSAN

Vehicle model: Qashqai

Model year: Confirm by OE reference

272V06LE0B installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-086, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6205-086 record remains the picking reference.

For trade item 6205-086, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6205-086 on the packing instruction.

Frequently Asked Questions

How should item 6205-086 and blower number 272V06LE0B be verified?

Match 6205-086 to the complete 272V06LE0B marking, then compare the 6205-086 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-086 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-086; confirm steering position, climate-control specification and the original 6205-086 geometry before approval.

What circuit checks are useful when 6205-086 does not operate?

For 6205-086, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-086 motor again.

Which details should accompany a wholesale request for 6205-086?

Provide item 6205-086, OE 272V06LE0B, the stated application, quantity and destination; add 6205-086 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-086?

Clear debris from the air inlet, check that the 6205-086 wheel turns freely, seat the 6205-086 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-086: Send 272V06LE0B, the 6205-086 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.