AutoParts

272700-0400 Blower Motor for TOYOTA Avanza

Blower Motor — 272700-0400. TOYOTA Avanza. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
272700-0400
Supplier SKU
6210-039
Vehicle application
TOYOTA Avanza
Part type
Blower Motor
Send an inquiry

Key references

OE reference
272700-0400
Supplier SKU
6210-039
Vehicle application
TOYOTA Avanza
Part type
Blower Motor

Product specifications

OE reference272700-0400
Supplier SKU6210-039
Vehicle applicationTOYOTA Avanza
Vehicle makeTOYOTA
Vehicle modelAvanza
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers87103-60290

Product details

272700-0400 Automotive Blower Motor Overview

This listing links 272700-0400 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6210-039, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6210-039 when comparing this 272700-0400 airflow configuration.

OE Reference and Application

The primary catalogue number is 272700-0400 . The recorded application is TOYOTA Avanza. For 6210-039, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6210-039 with the approved OE reference.

HVAC Interface and 272700-0400 installation

During work on 6210-039, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 272700-0400 installation. Recheck 6210-039 before the lower trim is closed.

For item 6210-039, confirm that the 272700-0400 centrifugal wheel clears its housing and that the 6210-039 connector lock engages without force. After seating 6210-039, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-039.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 272700-0400

Cross-reference numbers: 87103-60290

Vehicle brand: TOYOTA

Vehicle model: Avanza

Model year: Confirm by OE reference

272700-0400 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6210-039, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6210-039 record remains the picking reference.

For trade item 6210-039, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6210-039 on the packing instruction.

Frequently Asked Questions

How should item 6210-039 and blower number 272700-0400 be verified?

Match 6210-039 to the complete 272700-0400 marking, then compare the 6210-039 plug, terminal count, mounting flange and wheel dimensions with the removed TOYOTA unit.

Can 6210-039 have more than one vehicle-side blower configuration?

Yes. TOYOTA production changes can affect 6210-039; confirm steering position, climate-control specification and the original 6210-039 geometry before approval.

What circuit checks are useful when 6210-039 does not operate?

For 6210-039, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-039 motor again.

Which details should accompany a wholesale request for 6210-039?

Provide item 6210-039, OE 272700-0400, the stated application, quantity and destination; add 6210-039 carton or private-label requirements separately.

How can noise be avoided after fitting 6210-039?

Clear debris from the air inlet, check that the 6210-039 wheel turns freely, seat the 6210-039 flange evenly and keep wiring away from the impeller.

Request a quote for 6210-039: Send 272700-0400, the 6210-039 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.