27226JY10A Blower Motor for NISSAN Koleos

27226JY10A Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by 27226JY10A to support OE-number comparison before purchase.

For catalogue item 6205-013, Cabin 27226JY10A airflow depends on the 27226JY10A motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6205-013 when comparing this 27226JY10A airflow configuration.

OE Reference and Application

The primary catalogue number is 27226JY10A . The recorded application is NISSAN Koleos. For 6205-013, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6205-013 with the approved OE reference.

HVAC Interface and 27226JY10A installation

During work on 6205-013, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6205-013 before the lower trim is closed.

For item 6205-013, confirm that the 27226JY10A centrifugal wheel clears its housing and that the 6205-013 connector lock engages without force. After seating 6205-013, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-013.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 27226JY10A

Cross-reference numbers: 27226JY10A

Vehicle brand: NISSAN

Vehicle model: Koleos

Model year: Confirm by OE reference

27226JY10A installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-013, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-013 record remains the picking reference.

For trade item 6205-013, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6205-013 on the packing instruction.

Frequently Asked Questions

How should item 6205-013 and blower number 27226JY10A be verified?

Match 6205-013 to the complete 27226JY10A marking, then compare the 6205-013 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-013 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-013; confirm steering position, climate-control specification and the original 6205-013 geometry before approval.

What circuit checks are useful when 6205-013 does not operate?

For 6205-013, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-013 motor again.

Which details should accompany a wholesale request for 6205-013?

Provide item 6205-013, OE 27226JY10A, the stated application, quantity and destination; add 6205-013 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-013?

Clear debris from the air inlet, check that the 6205-013 wheel turns freely, seat the 6205-013 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-013: Send 27226JY10A, the 6205-013 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country