27226EB71B Blower Motor for NISSAN Navara

27226EB71B Automotive Blower Motor Overview

Reference 27226EB71B identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6205-088, the 27226EB71B blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-088 when comparing this 27226EB71B airflow configuration.

OE Reference and Application

The primary catalogue number is 27226EB71B . The recorded application is NISSAN Navara. For 6205-088, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6205-088 with the approved OE reference.

HVAC Interface and 27226EB71B installation

During work on 6205-088, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-088 before the lower trim is closed.

For item 6205-088, confirm that the 27226EB71B centrifugal wheel clears its housing and that the 6205-088 connector lock engages without force. After seating 6205-088, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-088.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 27226EB71B

Cross-reference numbers: 27226EB71B

Vehicle brand: NISSAN

Vehicle model: Navara

Model year: Confirm by OE reference

27226EB71B installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-088, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-088 record remains the picking reference.

For trade item 6205-088, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6205-088 on the packing instruction.

Frequently Asked Questions

How should item 6205-088 and blower number 27226EB71B be verified?

Match 6205-088 to the complete 27226EB71B marking, then compare the 6205-088 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-088 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-088; confirm steering position, climate-control specification and the original 6205-088 geometry before approval.

What circuit checks are useful when 6205-088 does not operate?

For 6205-088, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-088 motor again.

Which details should accompany a wholesale request for 6205-088?

Provide item 6205-088, OE 27226EB71B, the stated application, quantity and destination; add 6205-088 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-088?

Clear debris from the air inlet, check that the 6205-088 wheel turns freely, seat the 6205-088 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-088: Send 27226EB71B, the 6205-088 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country