272268M200 Blower Motor for NISSAN Almera

272268M200 Automotive Blower Motor Overview

The 272268M200 record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6205-093, When the climate-control circuit commands 272268M200 airflow, the electric motor rotates the 272268M200 fan wheel inside the HVAC housing. Use 6205-093 when comparing this 272268M200 airflow configuration.

OE Reference and Application

The primary catalogue number is 272268M200 . The recorded application is NISSAN Almera. For 6205-093, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6205-093 with the approved OE reference.

HVAC Interface and 272268M200 installation

During work on 6205-093, If 272268M200 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 272268M200 motor is the only cause. Recheck 6205-093 before the lower trim is closed.

For item 6205-093, confirm that the 272268M200 centrifugal wheel clears its housing and that the 6205-093 connector lock engages without force. After seating 6205-093, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-093.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 272268M200

Cross-reference numbers: 27236BN010 / 27226BN000 / 27230AV000 / 272308M200

Vehicle brand: NISSAN

Vehicle model: Almera

Model year: Confirm by OE reference

272268M200 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-093, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-093 record remains the picking reference.

For trade item 6205-093, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6205-093 on the packing instruction.

Frequently Asked Questions

How should item 6205-093 and blower number 272268M200 be verified?

Match 6205-093 to the complete 272268M200 marking, then compare the 6205-093 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-093 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-093; confirm steering position, climate-control specification and the original 6205-093 geometry before approval.

What circuit checks are useful when 6205-093 does not operate?

For 6205-093, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-093 motor again.

Which details should accompany a wholesale request for 6205-093?

Provide item 6205-093, OE 272268M200, the stated application, quantity and destination; add 6205-093 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-093?

Clear debris from the air inlet, check that the 6205-093 wheel turns freely, seat the 6205-093 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-093: Send 272268M200, the 6205-093 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country