272261HM0A Blower Motor for NISSAN Sunny

272261HM0A Automotive Blower Motor Overview

This listing links 272261HM0A with the supplied blower-motor geometry, connector and application information.

For catalogue item 6205-075, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6205-075 when comparing this 272261HM0A airflow configuration.

OE Reference and Application

The primary catalogue number is 272261HM0A . The recorded application is NISSAN Sunny. For 6205-075, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6205-075 with the approved OE reference.

HVAC Interface and 272261HM0A installation

During work on 6205-075, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 272261HM0A installation. Recheck 6205-075 before the lower trim is closed.

For item 6205-075, confirm that the 272261HM0A centrifugal wheel clears its housing and that the 6205-075 connector lock engages without force. After seating 6205-075, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-075.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 272261HM0A

Cross-reference numbers: 272269SH0C / 27226-1HD0B / 272261HD08 / 272263LM0A / 27226-3AWOA-B009 / 27226-3AN0A / 27226-1HB0A / RC.530.196 / 272263AW0BB380 / 272263AW0A

Vehicle brand: NISSAN

Vehicle model: Sunny

Model year: Confirm by OE reference

272261HM0A installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-075, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-075 record remains the picking reference.

For trade item 6205-075, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6205-075 on the packing instruction.

Frequently Asked Questions

How should item 6205-075 and blower number 272261HM0A be verified?

Match 6205-075 to the complete 272261HM0A marking, then compare the 6205-075 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-075 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-075; confirm steering position, climate-control specification and the original 6205-075 geometry before approval.

What circuit checks are useful when 6205-075 does not operate?

For 6205-075, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-075 motor again.

Which details should accompany a wholesale request for 6205-075?

Provide item 6205-075, OE 272261HM0A, the stated application, quantity and destination; add 6205-075 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-075?

Clear debris from the air inlet, check that the 6205-075 wheel turns freely, seat the 6205-075 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-075: Send 272261HM0A, the 6205-075 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country