272261FC0B Blower Motor for NISSAN Juke

272261FC0B Automotive Blower Motor Overview

The 272261FC0B record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6205-037, When the climate-control circuit commands 272261FC0B airflow, the electric motor rotates the 272261FC0B fan wheel inside the HVAC housing. Use 6205-037 when comparing this 272261FC0B airflow configuration.

OE Reference and Application

The primary catalogue number is 272261FC0B . The recorded application is NISSAN Juke. For 6205-037, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6205-037 with the approved OE reference.

HVAC Interface and 272261FC0B installation

During work on 6205-037, If 272261FC0B airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 272261FC0B motor is the only cause. Recheck 6205-037 before the lower trim is closed.

For item 6205-037, confirm that the 272261FC0B centrifugal wheel clears its housing and that the 6205-037 connector lock engages without force. After seating 6205-037, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-037.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 272261FC0B

Cross-reference numbers: TYC700256 / BM4035C / PM4035 / 76952 / 272261KL0A / 700256 / HMA89948 / 34360 / T1015019K

Vehicle brand: NISSAN

Vehicle model: Juke

Model year: Confirm by OE reference

272261FC0B installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-037, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-037 record remains the picking reference.

For trade item 6205-037, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6205-037 on the packing instruction.

Frequently Asked Questions

How should item 6205-037 and blower number 272261FC0B be verified?

Match 6205-037 to the complete 272261FC0B marking, then compare the 6205-037 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-037 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-037; confirm steering position, climate-control specification and the original 6205-037 geometry before approval.

What circuit checks are useful when 6205-037 does not operate?

For 6205-037, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-037 motor again.

Which details should accompany a wholesale request for 6205-037?

Provide item 6205-037, OE 272261FC0B, the stated application, quantity and destination; add 6205-037 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-037?

Clear debris from the air inlet, check that the 6205-037 wheel turns freely, seat the 6205-037 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-037: Send 272261FC0B, the 6205-037 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country