27226-6LA0A-B250 Blower Motor for NISSAN Sylphy 2019

27226-6LA0A-B250 Automotive Blower Motor Overview

This product entry documents the 27226-6LA0A-B250 blower unit with practical identification and 27226-6LA0A-B250 installation checkpoints.

For catalogue item 6205-010, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 27226-6LA0A-B250 blower important at idle and in traffic. Use 6205-010 when comparing this 27226-6LA0A-B250 airflow configuration.

OE Reference and Application

The primary catalogue number is 27226-6LA0A-B250 . The recorded application is NISSAN Sylphy 2019. For 6205-010, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6205-010 with the approved OE reference.

HVAC Interface and 27226-6LA0A-B250 installation

During work on 6205-010, After 27226-6LA0A-B250 installation, operate low through high speed and confirm 27226-6LA0A-B250 airflow reaches the selected vents without abnormal vibration. Recheck 6205-010 before the lower trim is closed.

For item 6205-010, confirm that the 27226-6LA0A-B250 centrifugal wheel clears its housing and that the 6205-010 connector lock engages without force. After seating 6205-010, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-010.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 27226-6LA0A-B250

Cross-reference numbers: 27226-6LA0A

Vehicle brand: NISSAN

Vehicle model: Sylphy

Model year: 2019

27226-6LA0A-B250 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-010, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-010 record remains the picking reference.

For trade item 6205-010, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6205-010 on the packing instruction.

Frequently Asked Questions

How should item 6205-010 and blower number 27226-6LA0A-B250 be verified?

Match 6205-010 to the complete 27226-6LA0A-B250 marking, then compare the 6205-010 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-010 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-010; confirm steering position, climate-control specification and the original 6205-010 geometry before approval.

What circuit checks are useful when 6205-010 does not operate?

For 6205-010, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-010 motor again.

Which details should accompany a wholesale request for 6205-010?

Provide item 6205-010, OE 27226-6LA0A-B250, the stated application, quantity and destination; add 6205-010 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-010?

Clear debris from the air inlet, check that the 6205-010 wheel turns freely, seat the 6205-010 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-010: Send 27226-6LA0A-B250, the 6205-010 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.

Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country