27226-4BCOA-A129 Blower Motor for NISSAN Qashqai

27226-4BCOA-A129 Automotive Blower Motor Overview

Reference 27226-4BCOA-A129 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6205-065, the 27226-4BCOA-A129 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-065 when comparing this 27226-4BCOA-A129 airflow configuration.

OE Reference and Application

The primary catalogue number is 27226-4BCOA-A129 . The recorded application is NISSAN Qashqai. For 6205-065, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6205-065 with the approved OE reference.

HVAC Interface and 27226-4BCOA-A129 installation

During work on 6205-065, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-065 before the lower trim is closed.

For item 6205-065, confirm that the 27226-4BCOA-A129 centrifugal wheel clears its housing and that the 6205-065 connector lock engages without force. After seating 6205-065, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-065.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 27226-4BCOA-A129

Cross-reference numbers: 27226-4BCOA-A129

Vehicle brand: NISSAN

Vehicle model: Qashqai

Model year: Confirm by OE reference

27226-4BCOA-A129 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-065, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-065 record remains the picking reference.

For trade item 6205-065, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6205-065 on the packing instruction.

Frequently Asked Questions

How should item 6205-065 and blower number 27226-4BCOA-A129 be verified?

Match 6205-065 to the complete 27226-4BCOA-A129 marking, then compare the 6205-065 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-065 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-065; confirm steering position, climate-control specification and the original 6205-065 geometry before approval.

What circuit checks are useful when 6205-065 does not operate?

For 6205-065, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-065 motor again.

Which details should accompany a wholesale request for 6205-065?

Provide item 6205-065, OE 27226-4BCOA-A129, the stated application, quantity and destination; add 6205-065 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-065?

Clear debris from the air inlet, check that the 6205-065 wheel turns freely, seat the 6205-065 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-065: Send 27226-4BCOA-A129, the 6205-065 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country