27226-3SG0A Blower Motor for NISSAN Sentra 2013-2017

27226-3SG0A Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by 27226-3SG0A to support OE-number comparison before purchase.

For catalogue item 6205-011, Cabin 27226-3SG0A airflow depends on the 27226-3SG0A motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6205-011 when comparing this 27226-3SG0A airflow configuration.

OE Reference and Application

The primary catalogue number is 27226-3SG0A . The recorded application is NISSAN Sentra 2013-2017. For 6205-011, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6205-011 with the approved OE reference.

HVAC Interface and 27226-3SG0A installation

During work on 6205-011, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6205-011 before the lower trim is closed.

For item 6205-011, confirm that the 27226-3SG0A centrifugal wheel clears its housing and that the 6205-011 connector lock engages without force. After seating 6205-011, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-011.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 27226-3SG0A

Cross-reference numbers: 27226-3SG0A

Vehicle brand: NISSAN

Vehicle model: Sentra

Model year: 2013-2017

27226-3SG0A installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-011, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-011 record remains the picking reference.

For trade item 6205-011, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6205-011 on the packing instruction.

Frequently Asked Questions

How should item 6205-011 and blower number 27226-3SG0A be verified?

Match 6205-011 to the complete 27226-3SG0A marking, then compare the 6205-011 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-011 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-011; confirm steering position, climate-control specification and the original 6205-011 geometry before approval.

What circuit checks are useful when 6205-011 does not operate?

For 6205-011, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-011 motor again.

Which details should accompany a wholesale request for 6205-011?

Provide item 6205-011, OE 27226-3SG0A, the stated application, quantity and destination; add 6205-011 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-011?

Clear debris from the air inlet, check that the 6205-011 wheel turns freely, seat the 6205-011 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-011: Send 27226-3SG0A, the 6205-011 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country