27220-VJ200 Blower Motor for NISSAN Navara

27220-VJ200 Automotive Blower Motor Overview

This product entry documents the 27220-VJ200 blower unit with practical identification and 27220-VJ200 installation checkpoints.

For catalogue item 6205-079, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 27220-VJ200 blower important at idle and in traffic. Use 6205-079 when comparing this 27220-VJ200 airflow configuration.

OE Reference and Application

The primary catalogue number is 27220-VJ200 . The recorded application is NISSAN Navara. For 6205-079, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6205-079 with the approved OE reference.

HVAC Interface and 27220-VJ200 installation

During work on 6205-079, After 27220-VJ200 installation, operate low through high speed and confirm 27220-VJ200 airflow reaches the selected vents without abnormal vibration. Recheck 6205-079 before the lower trim is closed.

For item 6205-079, confirm that the 27220-VJ200 centrifugal wheel clears its housing and that the 6205-079 connector lock engages without force. After seating 6205-079, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-079.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 27220-VJ200

Cross-reference numbers: 27220-VJ200

Vehicle brand: NISSAN

Vehicle model: Navara

Model year: Confirm by OE reference

27220-VJ200 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-079, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-079 record remains the picking reference.

For trade item 6205-079, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6205-079 on the packing instruction.

Frequently Asked Questions

How should item 6205-079 and blower number 27220-VJ200 be verified?

Match 6205-079 to the complete 27220-VJ200 marking, then compare the 6205-079 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-079 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-079; confirm steering position, climate-control specification and the original 6205-079 geometry before approval.

What circuit checks are useful when 6205-079 does not operate?

For 6205-079, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-079 motor again.

Which details should accompany a wholesale request for 6205-079?

Provide item 6205-079, OE 27220-VJ200, the stated application, quantity and destination; add 6205-079 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-079?

Clear debris from the air inlet, check that the 6205-079 wheel turns freely, seat the 6205-079 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-079: Send 27220-VJ200, the 6205-079 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.

Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country