27220-JK01A Blower Motor for NISSAN Patrol

27220-JK01A Automotive Blower Motor Overview

Buyers comparing an interior fan motor can use 27220-JK01A together with the 27220-JK01A product images and vehicle data on this page.

For catalogue item 6205-012, the 27220-JK01A blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-012 when comparing this 27220-JK01A airflow configuration.

OE Reference and Application

The primary catalogue number is 27220-JK01A . The recorded application is NISSAN Patrol. For 6205-012, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6205-012 with the approved OE reference.

HVAC Interface and 27220-JK01A installation

During work on 6205-012, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-012 before the lower trim is closed.

For item 6205-012, confirm that the 27220-JK01A centrifugal wheel clears its housing and that the 6205-012 connector lock engages without force. After seating 6205-012, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-012.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 27220-JK01A

Cross-reference numbers: 27225AL500 / 27220CB000 / 3K01304Y24 / 27220JK00C / 272204JA0A / 27200-JA000 / 27220JK00D / 27220JK00A

Vehicle brand: NISSAN

Vehicle model: Patrol

Model year: Confirm by OE reference

27220-JK01A installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-012, Packing preparation accounts for the 27220-JK01A motor weight and wheel shape to reduce movement inside the carton. The 6205-012 record remains the picking reference.

For trade item 6205-012, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6205-012 on the packing instruction.

Frequently Asked Questions

How should item 6205-012 and blower number 27220-JK01A be verified?

Match 6205-012 to the complete 27220-JK01A marking, then compare the 6205-012 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-012 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-012; confirm steering position, climate-control specification and the original 6205-012 geometry before approval.

What circuit checks are useful when 6205-012 does not operate?

For 6205-012, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-012 motor again.

Which details should accompany a wholesale request for 6205-012?

Provide item 6205-012, OE 27220-JK01A, the stated application, quantity and destination; add 6205-012 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-012?

Clear debris from the air inlet, check that the 6205-012 wheel turns freely, seat the 6205-012 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-012: Send 27220-JK01A, the 6205-012 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country