AutoParts
27220-5V201 Blower Motor for NISSAN Safari
Blower Motor — 27220-5V201. NISSAN Safari. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.
- OE reference
- 27220-5V201
- Supplier SKU
- 6205-068
- Vehicle application
- NISSAN Safari
- Part type
- Blower Motor
Key references
- OE reference
- 27220-5V201
- Supplier SKU
- 6205-068
- Vehicle application
- NISSAN Safari
- Part type
- Blower Motor
Product specifications
| OE reference | 27220-5V201 |
|---|---|
| Supplier SKU | 6205-068 |
| Vehicle application | NISSAN Safari |
| Vehicle make | NISSAN |
| Vehicle model | Safari |
| Production years | Confirm by OE reference |
| Part type | Blower Motor |
| Cross-reference numbers | 27220-5V201 |
Product details
27220-5V201 Automotive Blower Motor Overview
The 27220-5V201 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6205-068, When the climate-control circuit commands 27220-5V201 airflow, the electric motor rotates the 27220-5V201 fan wheel inside the HVAC housing. Use 6205-068 when comparing this 27220-5V201 airflow configuration.
OE Reference and Application
The primary catalogue number is 27220-5V201 . The recorded application is NISSAN Safari. For 6205-068, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6205-068 with the approved OE reference.
HVAC Interface and 27220-5V201 installation
During work on 6205-068, If 27220-5V201 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 27220-5V201 motor is the only cause. Recheck 6205-068 before the lower trim is closed.
For item 6205-068, confirm that the 27220-5V201 centrifugal wheel clears its housing and that the 6205-068 connector lock engages without force. After seating 6205-068, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-068.
Automotive HVAC Blower Motor Specifications
Product type: Automotive HVAC Blower Motor
Primary OE reference: 27220-5V201
Cross-reference numbers: 27220-5V201
Vehicle brand: NISSAN
Vehicle model: Safari
Model year: Confirm by OE reference
27220-5V201 installation area: Cabin HVAC / heater blower housing
Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel
Fitment method: OE-number and physical-geometry comparison
Quality and Trade Supply
For product 6205-068, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-068 record remains the picking reference.
For trade item 6205-068, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6205-068 on the packing instruction.
Frequently Asked Questions
How should item 6205-068 and blower number 27220-5V201 be verified?
Match 6205-068 to the complete 27220-5V201 marking, then compare the 6205-068 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-068 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-068; confirm steering position, climate-control specification and the original 6205-068 geometry before approval.
What circuit checks are useful when 6205-068 does not operate?
For 6205-068, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-068 motor again.
Which details should accompany a wholesale request for 6205-068?
Provide item 6205-068, OE 27220-5V201, the stated application, quantity and destination; add 6205-068 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-068?
Clear debris from the air inlet, check that the 6205-068 wheel turns freely, seat the 6205-068 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-068: Send 27220-5V201, the 6205-068 application and required quantity for a fitment and supply review.
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
Product classification
Vehicle systems
Cooling System
Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Part categories
Blower Motor
Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Frequently Asked Questions
What should I include in a quotation request?
Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.
How can I confirm the correct part?
Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.
Can I specify packing requirements?
Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.