26560-5C000 Rear Bumper Light for NISSAN Livina Right

26560-5C000 Rear Bumper Light Overview

This product is listed for NISSAN Livina at the right rear-bumper position. Some versions are passive reflectors, while others contain a lamp or wiring. The photographed configuration defines the supplied type.

A correct vehicle name is only the starting point; market trim and facelift details can change the reflector opening.

Before approving the Livina part for packing, compare the bumper corner radius with the product face from more than one viewing angle to keep the optical face level with the surrounding painted surface.

Vehicle Fitment and Bumper Interface

Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.

Use the removed component as the physical reference for outer shape, housing projection and clip location.

Before fitting the right unit, align each locating tab with the matching slot before applying hand pressure before any modification is made to the bumper or replacement part.

While the NISSAN bumper opening is accessible, check whether the original component uses a separate retainer or an integral locking tab before deciding whether original hardware is suitable for reuse.

Reflector, Lens and Electrical Configuration

Where a cable is fitted, inspect the seal and connector keying so the replacement does not introduce moisture or terminal stress.

Protect the exposed face from tools and fasteners while the bumper liner is open for access.

During comparison of the NISSAN rear component, verify the fastener direction and the shape of the concealed support frame because facelift bumpers can retain the same vehicle name with different apertures.

For a repeat order of the right version, protect the visible surface until the full perimeter gap has been accepted so left- and right-hand stock cannot be mixed during consolidation.

Installation and Functional Check

Check the mounting direction and side before installation; left and right components are not automatically interchangeable.

Complete a visual alignment check from the rear and side, then test illumination when wiring is present.

On the specified production period Livina bumper layout, review the reflector texture and lens colour in neutral workshop light so the approved product can be picked consistently in a mixed wholesale order.

At the workshop selection stage for Livina, record the approved side and vehicle application for repeat-order identification so hidden brackets are not loaded or bent during installation.

Automotive Lighting Product Specifications

Product type: Rear Bumper Light

Primary OE reference: 26560-5C000

Cross-reference numbers: 26560-5C000

Internal item code: NS04004-002

Vehicle brand: NISSAN

Vehicle model: Livina

Model year: Not specified

Installation position: Rear bumper / reflector opening

Side / orientation: Right

Configuration: Match the photographed reflector or powered-lamp version

Wholesale Supply and Protective Packing

Trade enquiries should include the vehicle year, model, bumper position and destination market for accurate picking.

Before sealing the carton, compare the packed side and quantity with the buyer’s order line.

At the right rear-bumper position, confirm that the cable exit, where fitted, clears the bumper reinforcement to preserve access for a final electrical test where a lamp circuit is present.

When reviewing the specified production period vehicle, confirm that any connector seal remains square when the housing is fully seated to reduce clip damage during a no-force trial installation.

Frequently Asked Questions

What details help with a wholesale quote?

Provide vehicle, year, side, quantity, destination and clear photographs of the removed component.

Is this component illuminated or reflector-only?

Use the product photographs to confirm whether the rear body carries a connector, bulb holder or LED wiring.

What should be tested after fitting?

Check panel alignment and, for powered versions, verify the intended rear-lighting function before closing access panels.

Can appearance alone confirm compatibility?

No. A similar colour and outline can hide different clips, housing depth, wiring or side orientation.

Why can the same model year use another version?

Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.

Request a Product-Specific Quote

The sales team can check whether accessories shown in the photograph are part of the requested scope.

Housing match: Compare the visible outline, rear housing depth and locating tabs with the removed part before ordering.

Reflector or lamp role: Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.

Selection context: Production date and regional bumper specification should be reviewed when several near-identical versions are available.

Post-fit check: Check the opposite side as a reference for height, angle and edge gap before completing the repair.

Purchase information: For a wholesale quotation, provide vehicle details, required side, quantity, destination and a photograph of the removed part.