AutoParts

23438987 Blower Motor for CHEVROLET Camaro 2010-2015

Blower Motor — 23438987. CHEVROLET Camaro 2010-2015. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
23438987
Supplier SKU
6209-012
Vehicle application
CHEVROLET Camaro 2010-2015
Part type
Blower Motor
Send an inquiry

Key references

OE reference
23438987
Supplier SKU
6209-012
Vehicle application
CHEVROLET Camaro 2010-2015
Part type
Blower Motor

Product specifications

OE reference23438987
Supplier SKU6209-012
Vehicle applicationCHEVROLET Camaro 2010-2015
Vehicle makeCHEVROLET
Vehicle modelCamaro
Production years2010-2015
Part typeBlower Motor
Cross-reference numbers15-63797 / 700307 / TIY40464 / 76927 / 15-81714

Product details

23438987 Automotive Blower Motor Overview

Reference 23438987 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6209-012, the 23438987 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6209-012 when comparing this 23438987 airflow configuration.

OE Reference and Application

The primary catalogue number is 23438987 . The recorded application is CHEVROLET Camaro 2010-2015. For 6209-012, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6209-012 with the approved OE reference.

HVAC Interface and 23438987 installation

During work on 6209-012, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6209-012 before the lower trim is closed.

For item 6209-012, confirm that the 23438987 centrifugal wheel clears its housing and that the 6209-012 connector lock engages without force. After seating 6209-012, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6209-012.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 23438987

Cross-reference numbers: 15-63797 / 700307 / TIY40464 / 76927 / 15-81714

Vehicle brand: CHEVROLET

Vehicle model: Camaro

Model year: 2010-2015

23438987 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6209-012, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6209-012 record remains the picking reference.

For trade item 6209-012, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6209-012 on the packing instruction.

Frequently Asked Questions

How should item 6209-012 and blower number 23438987 be verified?

Match 6209-012 to the complete 23438987 marking, then compare the 6209-012 plug, terminal count, mounting flange and wheel dimensions with the removed CHEVROLET unit.

Can 6209-012 have more than one vehicle-side blower configuration?

Yes. CHEVROLET production changes can affect 6209-012; confirm steering position, climate-control specification and the original 6209-012 geometry before approval.

What circuit checks are useful when 6209-012 does not operate?

For 6209-012, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6209-012 motor again.

Which details should accompany a wholesale request for 6209-012?

Provide item 6209-012, OE 23438987, the stated application, quantity and destination; add 6209-012 carton or private-label requirements separately.

How can noise be avoided after fitting 6209-012?

Clear debris from the air inlet, check that the 6209-012 wheel turns freely, seat the 6209-012 flange evenly and keep wiring away from the impeller.

Request a quote for 6209-012: Send 23438987, the 6209-012 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.