22803996 Blower Motor for BUICK Enclave

22803996 Automotive Blower Motor Overview

The 22803996 record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6208-038, When the climate-control circuit commands 22803996 airflow, the electric motor rotates the 22803996 fan wheel inside the HVAC housing. Use 6208-038 when comparing this 22803996 airflow configuration.

OE Reference and Application

The primary catalogue number is 22803996 . The recorded application is BUICK Enclave. For 6208-038, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6208-038 with the approved OE reference.

HVAC Interface and 22803996 installation

During work on 6208-038, If 22803996 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 22803996 motor is the only cause. Recheck 6208-038 before the lower trim is closed.

For item 6208-038, confirm that the 22803996 centrifugal wheel clears its housing and that the 6208-038 connector lock engages without force. After seating 6208-038, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-038.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 22803996

Cross-reference numbers: TYC700267 / BM4067C / PM4067 / 75876

Vehicle brand: BUICK

Vehicle model: Enclave

Model year: Confirm by OE reference

22803996 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6208-038, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-038 record remains the picking reference.

For trade item 6208-038, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6208-038 on the packing instruction.

Frequently Asked Questions

How should item 6208-038 and blower number 22803996 be verified?

Match 6208-038 to the complete 22803996 marking, then compare the 6208-038 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.

Can 6208-038 have more than one vehicle-side blower configuration?

Yes. BUICK production changes can affect 6208-038; confirm steering position, climate-control specification and the original 6208-038 geometry before approval.

What circuit checks are useful when 6208-038 does not operate?

For 6208-038, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-038 motor again.

Which details should accompany a wholesale request for 6208-038?

Provide item 6208-038, OE 22803996, the stated application, quantity and destination; add 6208-038 carton or private-label requirements separately.

How can noise be avoided after fitting 6208-038?

Clear debris from the air inlet, check that the 6208-038 wheel turns freely, seat the 6208-038 flange evenly and keep wiring away from the impeller.

Request a quote for 6208-038: Send 22803996, the 6208-038 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country