2208203542 Blower Motor for MERCEDES-BENZ S-Class

2208203542 Automotive Blower Motor Overview

Reference 2208203542 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6232-036, the 2208203542 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6232-036 when comparing this 2208203542 airflow configuration.

OE Reference and Application

The primary catalogue number is 2208203542 . The recorded application is MERCEDES-BENZ S-Class. For 6232-036, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6232-036 with the approved OE reference.

HVAC Interface and 2208203542 installation

During work on 6232-036, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6232-036 before the lower trim is closed.

For item 6232-036, confirm that the 2208203542 centrifugal wheel clears its housing and that the 6232-036 connector lock engages without force. After seating 6232-036, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6232-036.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 2208203542

Cross-reference numbers: 2208203542

Vehicle brand: MERCEDES-BENZ

Vehicle model: S-Class

Model year: Confirm by OE reference

2208203542 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6232-036, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6232-036 record remains the picking reference.

For trade item 6232-036, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6232-036 on the packing instruction.

Frequently Asked Questions

How should item 6232-036 and blower number 2208203542 be verified?

Match 6232-036 to the complete 2208203542 marking, then compare the 6232-036 plug, terminal count, mounting flange and wheel dimensions with the removed MERCEDES-BENZ unit.

Can 6232-036 have more than one vehicle-side blower configuration?

Yes. MERCEDES-BENZ production changes can affect 6232-036; confirm steering position, climate-control specification and the original 6232-036 geometry before approval.

What circuit checks are useful when 6232-036 does not operate?

For 6232-036, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6232-036 motor again.

Which details should accompany a wholesale request for 6232-036?

Provide item 6232-036, OE 2208203542, the stated application, quantity and destination; add 6232-036 carton or private-label requirements separately.

How can noise be avoided after fitting 6232-036?

Clear debris from the air inlet, check that the 6232-036 wheel turns freely, seat the 6232-036 flange evenly and keep wiring away from the impeller.

Request a quote for 6232-036: Send 2208203542, the 6232-036 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country