20760618 Blower Motor for CHEVROLET Tahoe

20760618 Automotive Blower Motor Overview

Buyers comparing an interior fan motor can use 20760618 together with the 20760618 product images and vehicle data on this page.

For catalogue item 6209-022, the 20760618 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6209-022 when comparing this 20760618 airflow configuration.

OE Reference and Application

The primary catalogue number is 20760618 . The recorded application is CHEVROLET Tahoe. For 6209-022, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6209-022 with the approved OE reference.

HVAC Interface and 20760618 installation

During work on 6209-022, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6209-022 before the lower trim is closed.

For item 6209-022, confirm that the 20760618 centrifugal wheel clears its housing and that the 6209-022 connector lock engages without force. After seating 6209-022, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6209-022.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 20760618

Cross-reference numbers: 20883397 / 22741027 / 25860468 / 15-81099 / 19153680 / TYC700164 / PM2728 / PM9272 / 75748 / 15-8768 / 52400424 / 700089 / 615-00579 / 52400425 / 52494829 / 88986838 / 89018283 / 89018758 / 89019321

Vehicle brand: CHEVROLET

Vehicle model: Tahoe

Model year: Confirm by OE reference

20760618 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6209-022, Packing preparation accounts for the 20760618 motor weight and wheel shape to reduce movement inside the carton. The 6209-022 record remains the picking reference.

For trade item 6209-022, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6209-022 on the packing instruction.

Frequently Asked Questions

How should item 6209-022 and blower number 20760618 be verified?

Match 6209-022 to the complete 20760618 marking, then compare the 6209-022 plug, terminal count, mounting flange and wheel dimensions with the removed CHEVROLET unit.

Can 6209-022 have more than one vehicle-side blower configuration?

Yes. CHEVROLET production changes can affect 6209-022; confirm steering position, climate-control specification and the original 6209-022 geometry before approval.

What circuit checks are useful when 6209-022 does not operate?

For 6209-022, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6209-022 motor again.

Which details should accompany a wholesale request for 6209-022?

Provide item 6209-022, OE 20760618, the stated application, quantity and destination; add 6209-022 carton or private-label requirements separately.

How can noise be avoided after fitting 6209-022?

Clear debris from the air inlet, check that the 6209-022 wheel turns freely, seat the 6209-022 flange evenly and keep wiring away from the impeller.

Request a quote for 6209-022: Send 20760618, the 6209-022 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country