1K8 945 106B Rear Bumper Light for VOLKSWAGEN Scirocco 2013 Right

1K8 945 106B Rear Bumper Light Overview

This product is listed for VOLKSWAGEN Scirocco 2013 at the right rear-bumper position. This component completes the rear bumper lighting area and must match the correct side, lens type and vehicle trim.

The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.

On the 2013 Scirocco bumper layout, review the reflector texture and lens colour in neutral workshop light to keep the optical face level with the surrounding painted surface.

Bumper Opening and Vehicle Match

Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.

The surrounding bumper insert, exhaust trim and lower valance can help identify the correct application version.

At the workshop selection stage for Scirocco, record the approved side and vehicle application for repeat-order identification before any modification is made to the bumper or replacement part.

At the right rear-bumper position, confirm that the cable exit, where fitted, clears the bumper reinforcement before deciding whether original hardware is suitable for reuse.

Lens Construction and Powered Variants

Confirm separately whether the removed component uses wiring, a bulb holder or an integrated LED module.

Check the lens for scratches, cracks and distortion, then compare its moulded edge with the original component.

When reviewing the 2013 vehicle, confirm that any connector seal remains square when the housing is fully seated because facelift bumpers can retain the same vehicle name with different apertures.

For the VOLKSWAGEN Scirocco application, use the opposite-side component only as an alignment reference, not as an interchange part so left- and right-hand stock cannot be mixed during consolidation.

Mounting and Final Verification

Check the mounting direction and side before installation; left and right components are not automatically interchangeable.

Verify that bumper movement does not load the lens and that the component remains fully clipped at every corner.

For this Scirocco body configuration, compare the outer lens edge with the moulded bumper recess so the approved product can be picked consistently in a mixed wholesale order.

Before approving the Scirocco part for packing, inspect the lower valance and nearby exhaust trim for adequate operating clearance so hidden brackets are not loaded or bent during installation.

Automotive Lighting Product Specifications

Product type: Rear Bumper Light

Primary OE reference: 1K8 945 106B

Cross-reference numbers: 1K8 945 106B

Internal item code: VM04004-004

Vehicle brand: VOLKSWAGEN

Vehicle model: Scirocco

Model year: 2013

Installation position: Rear bumper / reflector opening

Side / orientation: Right

Configuration: Match the photographed reflector or powered-lamp version

Wholesale Supply and Protective Packing

For repeat orders, quote the vehicle application and side together so the correct bumper variant is selected.

Projecting tabs should be supported with shaped material instead of carrying the weight of other products.

Before fitting the right unit, check the rear housing projection against the space behind the bumper skin to preserve access for a final electrical test where a lamp circuit is present.

While the VOLKSWAGEN bumper opening is accessible, compare the bumper corner radius with the product face from more than one viewing angle to reduce clip damage during a no-force trial installation.

Frequently Asked Questions

Can appearance alone confirm compatibility?

No. A similar colour and outline can hide different clips, housing depth, wiring or side orientation.

Why can the same model year use another version?

Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.

How should the visible lens be packed?

Keep it isolated from carton pressure, loose hardware and neighbouring products with separate support for tabs.

Can the opposite side use the same part?

Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.

How is a passive reflector checked?

Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.

Request a Product-Specific Quote

Destination and carton-marking requirements can be included with the vehicle-specific enquiry.

Shape and clips: Review the corner radius, edge return and rear fastening points against the original bumper opening.

Rear visibility role: Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.

Post-fit check: Make sure the component does not touch hot exhaust trim or trap wiring against a sharp body edge.

Quotation details: Send front and rear photographs when the bumper uses several visually similar lens or wiring configurations.

Packing reference: Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.