1K2820015 Blower Motor for AUDI A6

1K2820015 Automotive Blower Motor Overview

AutoParts catalogues 1K2820015 as an HVAC 1K2820015 airflow component for workshops, distributors and export buyers.

For catalogue item 6233-021, When the climate-control circuit commands 1K2820015 airflow, the electric motor rotates the 1K2820015 fan wheel inside the HVAC housing. Use 6233-021 when comparing this 1K2820015 airflow configuration.

OE Reference and Application

The primary catalogue number is 1K2820015 . The recorded application is AUDI A6. For 6233-021, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed AUDI unit. Record 6233-021 with the approved OE reference.

HVAC Interface and 1K2820015 installation

During work on 6233-021, If 1K2820015 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 1K2820015 motor is the only cause. Recheck 6233-021 before the lower trim is closed.

For item 6233-021, confirm that the 1K2820015 centrifugal wheel clears its housing and that the 6233-021 connector lock engages without force. After seating 6233-021, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6233-021.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 1K2820015

Cross-reference numbers: 1K2820015A / 1K2820015C / 1K2820015F / 1K2820015G / 1K2820015H / 3C2820015 / 3C2820015D / 3C2820015E / 2511009 / 698812 / 1K2880015 / 3C2820015F

Vehicle brand: AUDI

Vehicle model: A6

Model year: Confirm by OE reference

1K2820015 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6233-021, Packing preparation accounts for the 1K2820015 motor weight and wheel shape to reduce movement inside the carton. The 6233-021 record remains the picking reference.

For trade item 6233-021, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6233-021 on the packing instruction.

Frequently Asked Questions

How should item 6233-021 and blower number 1K2820015 be verified?

Match 6233-021 to the complete 1K2820015 marking, then compare the 6233-021 plug, terminal count, mounting flange and wheel dimensions with the removed AUDI unit.

Can 6233-021 have more than one vehicle-side blower configuration?

Yes. AUDI production changes can affect 6233-021; confirm steering position, climate-control specification and the original 6233-021 geometry before approval.

What circuit checks are useful when 6233-021 does not operate?

For 6233-021, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6233-021 motor again.

Which details should accompany a wholesale request for 6233-021?

Provide item 6233-021, OE 1K2820015, the stated application, quantity and destination; add 6233-021 carton or private-label requirements separately.

How can noise be avoided after fitting 6233-021?

Clear debris from the air inlet, check that the 6233-021 wheel turns freely, seat the 6233-021 flange evenly and keep wiring away from the impeller.

Request a quote for 6233-021: Send 1K2820015, the 6233-021 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country