AutoParts

19193524 Blower Motor for DODGE

Blower Motor — 19193524. DODGE. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
19193524
Supplier SKU
6217-075
Vehicle application
DODGE
Part type
Blower Motor
Send an inquiry

Key references

OE reference
19193524
Supplier SKU
6217-075
Vehicle application
DODGE
Part type
Blower Motor

Product specifications

OE reference19193524
Supplier SKU6217-075
Vehicle applicationDODGE
Vehicle makeDODGE
Vehicle modelConfirm by OE reference
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers2015211 / 2311512 / 26-13995 / 3010483 / 5096255AA / 5073486AA

Product details

19193524 Automotive Blower Motor Overview

Use 19193524 as the initial catalogue reference for the pictured cabin blower motor, then confirm the physical interfaces.

For catalogue item 6217-075, Cabin 19193524 airflow depends on the 19193524 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6217-075 when comparing this 19193524 airflow configuration.

OE Reference and Application

The primary catalogue number is 19193524 . The recorded application is DODGE. For 6217-075, Review the original connector photograph and fastening layout when catalogue applications include more than one HVAC configuration. Record 6217-075 with the approved OE reference.

HVAC Interface and 19193524 installation

During work on 6217-075, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6217-075 before the lower trim is closed.

For item 6217-075, confirm that the 19193524 centrifugal wheel clears its housing and that the 6217-075 connector lock engages without force. After seating 6217-075, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6217-075.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 19193524

Cross-reference numbers: 2015211 / 2311512 / 26-13995 / 3010483 / 5096255AA / 5073486AA

Vehicle brand: DODGE

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

19193524 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6217-075, Packing preparation accounts for the 19193524 motor weight and wheel shape to reduce movement inside the carton. The 6217-075 record remains the picking reference.

For trade item 6217-075, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6217-075 on the packing instruction.

Frequently Asked Questions

How should item 6217-075 and blower number 19193524 be verified?

Match 6217-075 to the complete 19193524 marking, then compare the 6217-075 plug, terminal count, mounting flange and wheel dimensions with the removed DODGE unit.

Can 6217-075 have more than one vehicle-side blower configuration?

Yes. DODGE production changes can affect 6217-075; confirm steering position, climate-control specification and the original 6217-075 geometry before approval.

What circuit checks are useful when 6217-075 does not operate?

For 6217-075, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6217-075 motor again.

Which details should accompany a wholesale request for 6217-075?

Provide item 6217-075, OE 19193524, the stated application, quantity and destination; add 6217-075 carton or private-label requirements separately.

How can noise be avoided after fitting 6217-075?

Clear debris from the air inlet, check that the 6217-075 wheel turns freely, seat the 6217-075 flange evenly and keep wiring away from the impeller.

Request a quote for 6217-075: Send 19193524, the 6217-075 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Installation guidance: Do not energize the unit while loose in the housing; secure it correctly before performing the functional check.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.