AutoParts

19144548 Blower Motor for FORD

Blower Motor — 19144548. FORD. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
19144548
Supplier SKU
6204-125
Vehicle application
FORD
Part type
Blower Motor
Send an inquiry

Key references

OE reference
19144548
Supplier SKU
6204-125
Vehicle application
FORD
Part type
Blower Motor

Product specifications

OE reference19144548
Supplier SKU6204-125
Vehicle applicationFORD
Vehicle makeFORD
Vehicle modelConfirm by OE reference
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers19188952 / 3W4Z19805AA / F8VZ19805AA / F8VZ19805BA / XW4Z19805CA

Product details

19144548 Automotive Blower Motor Overview

The 19144548 record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6204-125, When the climate-control circuit commands 19144548 airflow, the electric motor rotates the 19144548 fan wheel inside the HVAC housing. Use 6204-125 when comparing this 19144548 airflow configuration.

OE Reference and Application

The primary catalogue number is 19144548 . The recorded application is FORD. For 6204-125, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6204-125 with the approved OE reference.

HVAC Interface and 19144548 installation

During work on 6204-125, If 19144548 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 19144548 motor is the only cause. Recheck 6204-125 before the lower trim is closed.

For item 6204-125, confirm that the 19144548 centrifugal wheel clears its housing and that the 6204-125 connector lock engages without force. After seating 6204-125, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-125.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 19144548

Cross-reference numbers: 19188952 / 3W4Z19805AA / F8VZ19805AA / F8VZ19805BA / XW4Z19805CA

Vehicle brand: FORD

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

19144548 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6204-125, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6204-125 record remains the picking reference.

For trade item 6204-125, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6204-125 on the packing instruction.

Frequently Asked Questions

How should item 6204-125 and blower number 19144548 be verified?

Match 6204-125 to the complete 19144548 marking, then compare the 6204-125 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6204-125 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6204-125; confirm steering position, climate-control specification and the original 6204-125 geometry before approval.

What circuit checks are useful when 6204-125 does not operate?

For 6204-125, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-125 motor again.

Which details should accompany a wholesale request for 6204-125?

Provide item 6204-125, OE 19144548, the stated application, quantity and destination; add 6204-125 carton or private-label requirements separately.

How can noise be avoided after fitting 6204-125?

Clear debris from the air inlet, check that the 6204-125 wheel turns freely, seat the 6204-125 flange evenly and keep wiring away from the impeller.

Request a quote for 6204-125: Send 19144548, the 6204-125 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.