1581701 Blower Motor for BUICK

1581701 Automotive Blower Motor Overview

Reference 1581701 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6208-095, the 1581701 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6208-095 when comparing this 1581701 airflow configuration.

OE Reference and Application

The primary catalogue number is 1581701 . The recorded application is BUICK. For 6208-095, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6208-095 with the approved OE reference.

HVAC Interface and 1581701 installation

During work on 6208-095, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6208-095 before the lower trim is closed.

For item 6208-095, confirm that the 1581701 centrifugal wheel clears its housing and that the 6208-095 connector lock engages without force. After seating 6208-095, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-095.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 1581701

Cross-reference numbers: 16241413-101 / 16241413-102 / 1800315 / 20958710

Vehicle brand: BUICK

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

1581701 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6208-095, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6208-095 record remains the picking reference.

For trade item 6208-095, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6208-095 on the packing instruction.

Frequently Asked Questions

How should item 6208-095 and blower number 1581701 be verified?

Match 6208-095 to the complete 1581701 marking, then compare the 6208-095 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.

Can 6208-095 have more than one vehicle-side blower configuration?

Yes. BUICK production changes can affect 6208-095; confirm steering position, climate-control specification and the original 6208-095 geometry before approval.

What circuit checks are useful when 6208-095 does not operate?

For 6208-095, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-095 motor again.

Which details should accompany a wholesale request for 6208-095?

Provide item 6208-095, OE 1581701, the stated application, quantity and destination; add 6208-095 carton or private-label requirements separately.

How can noise be avoided after fitting 6208-095?

Clear debris from the air inlet, check that the 6208-095 wheel turns freely, seat the 6208-095 flange evenly and keep wiring away from the impeller.

Request a quote for 6208-095: Send 1581701, the 6208-095 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country