AutoParts
1504121 Blower Motor for FORD
Blower Motor — 1504121. FORD. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.
- OE reference
- 1504121
- Supplier SKU
- 6203-140
- Vehicle application
- FORD
- Part type
- Blower Motor
Key references
- OE reference
- 1504121
- Supplier SKU
- 6203-140
- Vehicle application
- FORD
- Part type
- Blower Motor
Product specifications
| OE reference | 1504121 |
|---|---|
| Supplier SKU | 6203-140 |
| Vehicle application | FORD |
| Vehicle make | FORD |
| Vehicle model | Confirm by OE reference |
| Production years | Confirm by OE reference |
| Part type | Blower Motor |
| Cross-reference numbers | 16241260-101 / 16241260-102 / 1800102 / 203142BSM / 203364 |
Product details
1504121 Automotive Blower Motor Overview
The 1504121 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6203-140, When the climate-control circuit commands 1504121 airflow, the electric motor rotates the 1504121 fan wheel inside the HVAC housing. Use 6203-140 when comparing this 1504121 airflow configuration.
OE Reference and Application
The primary catalogue number is 1504121 . The recorded application is FORD. For 6203-140, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6203-140 with the approved OE reference.
HVAC Interface and 1504121 installation
During work on 6203-140, If 1504121 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 1504121 motor is the only cause. Recheck 6203-140 before the lower trim is closed.
For item 6203-140, confirm that the 1504121 centrifugal wheel clears its housing and that the 6203-140 connector lock engages without force. After seating 6203-140, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-140.
Automotive HVAC Blower Motor Specifications
Product type: Automotive HVAC Blower Motor
Primary OE reference: 1504121
Cross-reference numbers: 16241260-101 / 16241260-102 / 1800102 / 203142BSM / 203364
Vehicle brand: FORD
Vehicle model: Confirm by OE reference
Model year: Confirm by OE reference
1504121 installation area: Cabin HVAC / heater blower housing
Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel
Fitment method: OE-number and physical-geometry comparison
Quality and Trade Supply
For product 6203-140, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6203-140 record remains the picking reference.
For trade item 6203-140, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6203-140 on the packing instruction.
Frequently Asked Questions
How should item 6203-140 and blower number 1504121 be verified?
Match 6203-140 to the complete 1504121 marking, then compare the 6203-140 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-140 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-140; confirm steering position, climate-control specification and the original 6203-140 geometry before approval.
What circuit checks are useful when 6203-140 does not operate?
For 6203-140, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-140 motor again.
Which details should accompany a wholesale request for 6203-140?
Provide item 6203-140, OE 1504121, the stated application, quantity and destination; add 6203-140 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-140?
Clear debris from the air inlet, check that the 6203-140 wheel turns freely, seat the 6203-140 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-140: Send 1504121, the 6203-140 application and required quantity for a fitment and supply review.
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
Product classification
Vehicle systems
Cooling System
Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Part categories
Blower Motor
Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Frequently Asked Questions
What should I include in a quotation request?
Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.
How can I confirm the correct part?
Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.
Can I specify packing requirements?
Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.