AutoParts
15-81763 Blower Motor for CHEVROLET Captiva Sport
Blower Motor — 15-81763. CHEVROLET Captiva Sport. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.
- OE reference
- 15-81763
- Supplier SKU
- 6208-039
- Vehicle application
- CHEVROLET Captiva Sport
- Part type
- Blower Motor
Key references
- OE reference
- 15-81763
- Supplier SKU
- 6208-039
- Vehicle application
- CHEVROLET Captiva Sport
- Part type
- Blower Motor
Product specifications
| OE reference | 15-81763 |
|---|---|
| Supplier SKU | 6208-039 |
| Vehicle application | CHEVROLET Captiva Sport |
| Vehicle make | CHEVROLET |
| Vehicle model | Captiva Sport |
| Production years | Confirm by OE reference |
| Part type | Blower Motor |
| Cross-reference numbers | 15-81763 |
Product details
15-81763 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 15-81763 to support OE-number comparison before purchase.
For catalogue item 6208-039, Cabin 15-81763 airflow depends on the 15-81763 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6208-039 when comparing this 15-81763 airflow configuration.
OE Reference and Application
The primary catalogue number is 15-81763 . The recorded application is CHEVROLET Captiva Sport. For 6208-039, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6208-039 with the approved OE reference.
HVAC Interface and 15-81763 installation
During work on 6208-039, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6208-039 before the lower trim is closed.
For item 6208-039, confirm that the 15-81763 centrifugal wheel clears its housing and that the 6208-039 connector lock engages without force. After seating 6208-039, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-039.
Automotive HVAC Blower Motor Specifications
Product type: Automotive HVAC Blower Motor
Primary OE reference: 15-81763
Cross-reference numbers: 15-81763
Vehicle brand: CHEVROLET
Vehicle model: Captiva Sport
Model year: Confirm by OE reference
15-81763 installation area: Cabin HVAC / heater blower housing
Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel
Fitment method: OE-number and physical-geometry comparison
Quality and Trade Supply
For product 6208-039, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-039 record remains the picking reference.
For trade item 6208-039, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6208-039 on the packing instruction.
Frequently Asked Questions
How should item 6208-039 and blower number 15-81763 be verified?
Match 6208-039 to the complete 15-81763 marking, then compare the 6208-039 plug, terminal count, mounting flange and wheel dimensions with the removed CHEVROLET unit.
Can 6208-039 have more than one vehicle-side blower configuration?
Yes. CHEVROLET production changes can affect 6208-039; confirm steering position, climate-control specification and the original 6208-039 geometry before approval.
What circuit checks are useful when 6208-039 does not operate?
For 6208-039, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-039 motor again.
Which details should accompany a wholesale request for 6208-039?
Provide item 6208-039, OE 15-81763, the stated application, quantity and destination; add 6208-039 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-039?
Clear debris from the air inlet, check that the 6208-039 wheel turns freely, seat the 6208-039 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-039: Send 15-81763, the 6208-039 application and required quantity for a fitment and supply review.
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
Product classification
Vehicle systems
Cooling System
Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Part categories
Blower Motor
Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Frequently Asked Questions
What should I include in a quotation request?
Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.
How can I confirm the correct part?
Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.
Can I specify packing requirements?
Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.