15-81062 Blower Motor for BUICK Enclave

15-81062 Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by 15-81062 to support OE-number comparison before purchase.

For catalogue item 6208-028, Cabin 15-81062 airflow depends on the 15-81062 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6208-028 when comparing this 15-81062 airflow configuration.

OE Reference and Application

The primary catalogue number is 15-81062 . The recorded application is BUICK Enclave. For 6208-028, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6208-028 with the approved OE reference.

HVAC Interface and 15-81062 installation

During work on 6208-028, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6208-028 before the lower trim is closed.

For item 6208-028, confirm that the 15-81062 centrifugal wheel clears its housing and that the 6208-028 connector lock engages without force. After seating 6208-028, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-028.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 15-81062

Cross-reference numbers: 15920865 / 15-817881 / 76976 / 331101402 / 6552870 / PM5132 / 15-81781 / 52027354

Vehicle brand: BUICK

Vehicle model: Enclave

Model year: Confirm by OE reference

15-81062 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6208-028, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-028 record remains the picking reference.

For trade item 6208-028, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6208-028 on the packing instruction.

Frequently Asked Questions

How should item 6208-028 and blower number 15-81062 be verified?

Match 6208-028 to the complete 15-81062 marking, then compare the 6208-028 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.

Can 6208-028 have more than one vehicle-side blower configuration?

Yes. BUICK production changes can affect 6208-028; confirm steering position, climate-control specification and the original 6208-028 geometry before approval.

What circuit checks are useful when 6208-028 does not operate?

For 6208-028, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-028 motor again.

Which details should accompany a wholesale request for 6208-028?

Provide item 6208-028, OE 15-81062, the stated application, quantity and destination; add 6208-028 carton or private-label requirements separately.

How can noise be avoided after fitting 6208-028?

Clear debris from the air inlet, check that the 6208-028 wheel turns freely, seat the 6208-028 flange evenly and keep wiring away from the impeller.

Request a quote for 6208-028: Send 15-81062, the 6208-028 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country