13263279 Blower Motor for BUICK Regal

13263279 Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by 13263279 to support OE-number comparison before purchase.

For catalogue item 6208-001, Cabin 13263279 airflow depends on the 13263279 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6208-001 when comparing this 13263279 airflow configuration.

OE Reference and Application

The primary catalogue number is 13263279 . The recorded application is BUICK Regal. For 6208-001, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6208-001 with the approved OE reference.

HVAC Interface and 13263279 installation

During work on 6208-001, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6208-001 before the lower trim is closed.

For item 6208-001, confirm that the 13263279 centrifugal wheel clears its housing and that the 6208-001 connector lock engages without force. After seating 6208-001, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-001.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 13263279

Cross-reference numbers: 15-81755 / 20782694 / 22956040 / TYC76904 / PM9375 / 13369460 / BM9375C / 76904 / 75874 / 16450666 / 2311823 / 8E5Z19805A / AE5Z-19805-D / AE5Z-19805-A / AE5Z-19805-B / AE5Z-19805-C / DG9Z19805B / 22957138 / 9073308 / 700269

Vehicle brand: BUICK

Vehicle model: Regal

Model year: Confirm by OE reference

13263279 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6208-001, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6208-001 record remains the picking reference.

For trade item 6208-001, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6208-001 on the packing instruction.

Frequently Asked Questions

How should item 6208-001 and blower number 13263279 be verified?

Match 6208-001 to the complete 13263279 marking, then compare the 6208-001 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.

Can 6208-001 have more than one vehicle-side blower configuration?

Yes. BUICK production changes can affect 6208-001; confirm steering position, climate-control specification and the original 6208-001 geometry before approval.

What circuit checks are useful when 6208-001 does not operate?

For 6208-001, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-001 motor again.

Which details should accompany a wholesale request for 6208-001?

Provide item 6208-001, OE 13263279, the stated application, quantity and destination; add 6208-001 carton or private-label requirements separately.

How can noise be avoided after fitting 6208-001?

Clear debris from the air inlet, check that the 6208-001 wheel turns freely, seat the 6208-001 flange evenly and keep wiring away from the impeller.

Request a quote for 6208-001: Send 13263279, the 6208-001 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country