11N6-90700 Blower Motor for HYUNDAI R215-7

11N6-90700 Automotive Blower Motor Overview

The 11N6-90700 record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6202-025, When the climate-control circuit commands 11N6-90700 airflow, the electric motor rotates the 11N6-90700 fan wheel inside the HVAC housing. Use 6202-025 when comparing this 11N6-90700 airflow configuration.

OE Reference and Application

The primary catalogue number is 11N6-90700 . The recorded application is HYUNDAI R215-7. For 6202-025, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6202-025 with the approved OE reference.

HVAC Interface and 11N6-90700 installation

During work on 6202-025, If 11N6-90700 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 11N6-90700 motor is the only cause. Recheck 6202-025 before the lower trim is closed.

For item 6202-025, confirm that the 11N6-90700 centrifugal wheel clears its housing and that the 6202-025 connector lock engages without force. After seating 6202-025, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-025.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 11N6-90700

Cross-reference numbers: 11N6-90700

Vehicle brand: HYUNDAI

Vehicle model: R215-7

Model year: Confirm by OE reference

11N6-90700 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6202-025, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6202-025 record remains the picking reference.

For trade item 6202-025, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6202-025 on the packing instruction.

Frequently Asked Questions

How should item 6202-025 and blower number 11N6-90700 be verified?

Match 6202-025 to the complete 11N6-90700 marking, then compare the 6202-025 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.

Can 6202-025 have more than one vehicle-side blower configuration?

Yes. HYUNDAI production changes can affect 6202-025; confirm steering position, climate-control specification and the original 6202-025 geometry before approval.

What circuit checks are useful when 6202-025 does not operate?

For 6202-025, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-025 motor again.

Which details should accompany a wholesale request for 6202-025?

Provide item 6202-025, OE 11N6-90700, the stated application, quantity and destination; add 6202-025 carton or private-label requirements separately.

How can noise be avoided after fitting 6202-025?

Clear debris from the air inlet, check that the 6202-025 wheel turns freely, seat the 6202-025 flange evenly and keep wiring away from the impeller.

Request a quote for 6202-025: Send 11N6-90700, the 6202-025 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country