10340 Blower Motor for BUICK

10340 Automotive Blower Motor Overview

Reference 10340 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6208-090, the 10340 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6208-090 when comparing this 10340 airflow configuration.

OE Reference and Application

The primary catalogue number is 10340 . The recorded application is BUICK. For 6208-090, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6208-090 with the approved OE reference.

HVAC Interface and 10340 installation

During work on 6208-090, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6208-090 before the lower trim is closed.

For item 6208-090, confirm that the 10340 centrifugal wheel clears its housing and that the 6208-090 connector lock engages without force. After seating 6208-090, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-090.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 10340

Cross-reference numbers: 1580474 / 1581085 / 1581096 / 158622

Vehicle brand: BUICK

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

10340 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6208-090, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-090 record remains the picking reference.

For trade item 6208-090, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6208-090 on the packing instruction.

Frequently Asked Questions

How should item 6208-090 and blower number 10340 be verified?

Match 6208-090 to the complete 10340 marking, then compare the 6208-090 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.

Can 6208-090 have more than one vehicle-side blower configuration?

Yes. BUICK production changes can affect 6208-090; confirm steering position, climate-control specification and the original 6208-090 geometry before approval.

What circuit checks are useful when 6208-090 does not operate?

For 6208-090, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-090 motor again.

Which details should accompany a wholesale request for 6208-090?

Provide item 6208-090, OE 10340, the stated application, quantity and destination; add 6208-090 carton or private-label requirements separately.

How can noise be avoided after fitting 6208-090?

Clear debris from the air inlet, check that the 6208-090 wheel turns freely, seat the 6208-090 flange evenly and keep wiring away from the impeller.

Request a quote for 6208-090: Send 10340, the 6208-090 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country