10019 Blower Motor for NISSAN

10019 Automotive Blower Motor Overview

This page records the pictured HVAC blower motor under OE reference 10019 for application-led sourcing.

For catalogue item 6205-041, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6205-041 when comparing this 10019 airflow configuration.

OE Reference and Application

The primary catalogue number is 10019 . The recorded application is NISSAN. For 6205-041, Measure the 10019 wheel height and outer diameter, then compare the electrical socket and base contour with the 10019 product photos. Record 6205-041 with the approved OE reference.

HVAC Interface and 10019 installation

During work on 6205-041, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 10019 installation. Recheck 6205-041 before the lower trim is closed.

For item 6205-041, confirm that the 10019 centrifugal wheel clears its housing and that the 6205-041 connector lock engages without force. After seating 6205-041, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-041.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 10019

Cross-reference numbers: 27226-4BUOA / 272264BG0B / 2311919 / 272264BC0A

Vehicle brand: NISSAN

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

10019 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-041, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6205-041 record remains the picking reference.

For trade item 6205-041, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6205-041 on the packing instruction.

Frequently Asked Questions

How should item 6205-041 and blower number 10019 be verified?

Match 6205-041 to the complete 10019 marking, then compare the 6205-041 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-041 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-041; confirm steering position, climate-control specification and the original 6205-041 geometry before approval.

What circuit checks are useful when 6205-041 does not operate?

For 6205-041, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-041 motor again.

Which details should accompany a wholesale request for 6205-041?

Provide item 6205-041, OE 10019, the stated application, quantity and destination; add 6205-041 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-041?

Clear debris from the air inlet, check that the 6205-041 wheel turns freely, seat the 6205-041 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-041: Send 10019, the 6205-041 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country