100101 Blower Motor for FORD F-350

100101 Automotive Blower Motor Overview

This listing links 100101 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6203-137, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6203-137 when comparing this 100101 airflow configuration.

OE Reference and Application

The primary catalogue number is 100101 . The recorded application is FORD F-350. For 6203-137, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6203-137 with the approved OE reference.

HVAC Interface and 100101 installation

During work on 6203-137, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 100101 installation. Recheck 6203-137 before the lower trim is closed.

For item 6203-137, confirm that the 100101 centrifugal wheel clears its housing and that the 6203-137 connector lock engages without force. After seating 6203-137, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-137.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 100101

Cross-reference numbers: 1580103 / 16241198-101 / 16241198-102 / 1800026 / 19805CA / 2015212 / 2311526 / AL1Z19805A / CL1Z19805B / 13439619

Vehicle brand: FORD

Vehicle model: F-350

Model year: Confirm by OE reference

100101 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6203-137, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6203-137 record remains the picking reference.

For trade item 6203-137, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6203-137 on the packing instruction.

Frequently Asked Questions

How should item 6203-137 and blower number 100101 be verified?

Match 6203-137 to the complete 100101 marking, then compare the 6203-137 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6203-137 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6203-137; confirm steering position, climate-control specification and the original 6203-137 geometry before approval.

What circuit checks are useful when 6203-137 does not operate?

For 6203-137, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-137 motor again.

Which details should accompany a wholesale request for 6203-137?

Provide item 6203-137, OE 100101, the stated application, quantity and destination; add 6203-137 carton or private-label requirements separately.

How can noise be avoided after fitting 6203-137?

Clear debris from the air inlet, check that the 6203-137 wheel turns freely, seat the 6203-137 flange evenly and keep wiring away from the impeller.

Request a quote for 6203-137: Send 100101, the 6203-137 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country