0K2A161B10 Blower Motor for KIA Carens

0K2A161B10 Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by 0K2A161B10 to support OE-number comparison before purchase.

For catalogue item 6201-015, Cabin 0K2A161B10 airflow depends on the 0K2A161B10 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6201-015 when comparing this 0K2A161B10 airflow configuration.

OE Reference and Application

The primary catalogue number is 0K2A161B10 . The recorded application is KIA Carens. For 6201-015, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6201-015 with the approved OE reference.

HVAC Interface and 0K2A161B10 installation

During work on 6201-015, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6201-015 before the lower trim is closed.

For item 6201-015, confirm that the 0K2A161B10 centrifugal wheel clears its housing and that the 6201-015 connector lock engages without force. After seating 6201-015, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-015.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 0K2A161B10

Cross-reference numbers: AB130000P / 8EW351040581 / 70815665 / DD0302TT / 0K60A61B10 / 0K55261R07

Vehicle brand: KIA

Vehicle model: Carens

Model year: Confirm by OE reference

0K2A161B10 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6201-015, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6201-015 record remains the picking reference.

For trade item 6201-015, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6201-015 on the packing instruction.

Frequently Asked Questions

How should item 6201-015 and blower number 0K2A161B10 be verified?

Match 6201-015 to the complete 0K2A161B10 marking, then compare the 6201-015 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.

Can 6201-015 have more than one vehicle-side blower configuration?

Yes. KIA production changes can affect 6201-015; confirm steering position, climate-control specification and the original 6201-015 geometry before approval.

What circuit checks are useful when 6201-015 does not operate?

For 6201-015, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-015 motor again.

Which details should accompany a wholesale request for 6201-015?

Provide item 6201-015, OE 0K2A161B10, the stated application, quantity and destination; add 6201-015 carton or private-label requirements separately.

How can noise be avoided after fitting 6201-015?

Clear debris from the air inlet, check that the 6201-015 wheel turns freely, seat the 6201-015 flange evenly and keep wiring away from the impeller.

Request a quote for 6201-015: Send 0K2A161B10, the 6201-015 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country