06M121013G Automotive Water Pump for AUDI A4

06M121013G is recorded for direct comparison with the removed pump. This AUDI A4 record identifies SKU AD01017055 through OE evidence. Buyers can therefore separate 06M121013G from similar-looking pumps.

Application approval for 06M121013G should combine the parts catalogue, VIN and removed component. The workbook provides A4 as a model reference, but SKU AD01017055 still requires vehicle-specific confirmation.

Product Technical Specifications

Product type: Automotive Engine Water Pump

Primary OE reference: 06M121013G

Internal item code: AD01017-055

Vehicle brand: AUDI

Model filter: A4

Cross-reference numbers: 06M121013G

Verification method: OE catalogue, VIN, production data and removed-pump comparison

Pump Inspection for Reliable Sealing

Before fitting 06M121013G, flush contaminated coolant and inspect belts, pulleys and hoses. After AD01017055 is installed, check for leakage at both cold and operating temperature.

Keep AD01017055 clean and capped until installation. Fit 06M121013G with the specified seal, torque pattern and coolant procedure, then bleed trapped air from the system.

Flange, Pulley and Port Checkpoints

The practical comparison for AD01017055 includes fastener positions, hose connections and installed clearance. Match all visible features of 06M121013G before transferring any hardware.

Review the 2 square AD01017055 views for connector, pulley and casing orientation. Final acceptance of 06M121013G should include a ruler or fixture check against the old pump.

Catalogue Review Before Installation

Validate 06M121013G using the AUDI VIN catalogue, not a generic model-year list. Compare AD01017055 with the original component before installation approval.

Fitment review for 06M121013G should combine AUDI vehicle data with a side-by-side inspection of AD01017055. Record the VIN, engine specification and original pump marking.

The workbook names A4 as an application clue for 06M121013G; vehicle-specific catalogue evidence still governs the final match.

Sample-to-Production Ordering

A complete request for AD01017055 includes 06M121013G, quantity, packing format and delivery destination. Buyers may submit the removed AUDI pump images for a technical cross-check.

Begin the commercial check with 06M121013G and AD01017055. AutoParts can discuss AUDI sample inspection, export cartons and mixed cooling-system orders.

Coolant Circulation Role

The undefined cooling loop depends on 06M121013G to maintain coolant movement. A correctly matched pump supports heat transfer during idle, acceleration and steady-speed driving.

Heat rejection on the undefined platform requires a sound water pump. Reference 06M121013G directs coolant around the circuit so absorbed heat can be released at the radiator.

Product Identification FAQ

What does 06M121013G do in the cooling system?

OE 06M121013G identifies an engine water pump. In the AUDI A4 cooling circuit, 06M121013G circulates coolant between heat-generating and heat-rejecting components.

Which evidence is required to approve 06M121013G?

Approve 06M121013G with VIN and catalogue data. Match SKU AD01017055 against the removed pump. Production changes can alter 06M121013G mounting or drive details.

Which physical details should match on 06M121013G?

Compare the 06M121013G housing, flange, ports, hub or pulley, impeller side and sealing face. Use the AD01017055 gallery for orientation. Measure 06M121013G before installation.

What evidence suggests damage to 06M121013G?

Inspect 06M121013G after coolant leakage, bearing noise, overheating or unstable circulation. During AD01017055 diagnosis, test belts, hoses, thermostat and coolant condition. Do not assume 06M121013G is the only cause.

Can AutoParts prepare a wholesale offer for 06M121013G?

Request 06M121013G pricing with item code AD01017055. Add quantity, destination and packaging instructions. Send original-part evidence when 06M121013G needs application review.

Submit a Buying Request for 06M121013G

Send 06M121013G quantity and destination to AutoParts. Identify the request with SKU AD01017055. Add packing details and original-pump evidence when 06M121013G needs application review.

Fitment notice: 06M121013G identifies the reference, not guaranteed fitment. Confirm SKU AD01017055 through VIN, engine data and removed-pump comparison.

Product: Automotive Water Pump

Application reference: AUDI OE-reference cooling-system application; confirm by VIN and removed-part comparison.

Inspection focus: housing profile, mounting flange, impeller or drive interface, ports, gasket face and connector where fitted

Supply note: Use the OE reference and SKU on all purchase documents.