0008352385 Blower Motor for MERCEDES-BENZ C-Class

0008352385 Automotive Blower Motor Overview

The 0008352385 record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6232-030, When the climate-control circuit commands 0008352385 airflow, the electric motor rotates the 0008352385 fan wheel inside the HVAC housing. Use 6232-030 when comparing this 0008352385 airflow configuration.

OE Reference and Application

The primary catalogue number is 0008352385 . The recorded application is MERCEDES-BENZ C-Class. For 6232-030, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6232-030 with the approved OE reference.

HVAC Interface and 0008352385 installation

During work on 6232-030, If 0008352385 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 0008352385 motor is the only cause. Recheck 6232-030 before the lower trim is closed.

For item 6232-030, confirm that the 0008352385 centrifugal wheel clears its housing and that the 6232-030 connector lock engages without force. After seating 6232-030, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6232-030.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 0008352385

Cross-reference numbers: 0018305808 / F651674J / 05991165 / 663329W / A0028301508 / 18305808

Vehicle brand: MERCEDES-BENZ

Vehicle model: C-Class

Model year: Confirm by OE reference

0008352385 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6232-030, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6232-030 record remains the picking reference.

For trade item 6232-030, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6232-030 on the packing instruction.

Frequently Asked Questions

How should item 6232-030 and blower number 0008352385 be verified?

Match 6232-030 to the complete 0008352385 marking, then compare the 6232-030 plug, terminal count, mounting flange and wheel dimensions with the removed MERCEDES-BENZ unit.

Can 6232-030 have more than one vehicle-side blower configuration?

Yes. MERCEDES-BENZ production changes can affect 6232-030; confirm steering position, climate-control specification and the original 6232-030 geometry before approval.

What circuit checks are useful when 6232-030 does not operate?

For 6232-030, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6232-030 motor again.

Which details should accompany a wholesale request for 6232-030?

Provide item 6232-030, OE 0008352385, the stated application, quantity and destination; add 6232-030 carton or private-label requirements separately.

How can noise be avoided after fitting 6232-030?

Clear debris from the air inlet, check that the 6232-030 wheel turns freely, seat the 6232-030 flange evenly and keep wiring away from the impeller.

Request a quote for 6232-030: Send 0008352385, the 6232-030 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country